Skip to main content

Study finds rumble strips save lives on rural highways

A recently completed study shows that rumble strips are proving to be an effective and low-cost way to reduce crashes on Michigan's state highways. The Michigan Department of Transportation (MDOT) started a major rumble strip program for two-lane high-speed rural highways in 2008. Centre-line and shoulder rumble strips were installed on all MDOT rural, non-freeway highways with posted speed limits of 55 mph and appropriate paved lane and shoulder widths. To date, 5,700 miles of centre-line rumble strips
June 2, 2015 Read time: 3 mins
A recently completed study shows that rumble strips are proving to be an effective and low-cost way to reduce crashes on Michigan's state highways.

The 1688 Michigan Department of Transportation (MDOT) started a major rumble strip program for two-lane high-speed rural highways in 2008. Centre-line and shoulder rumble strips were installed on all MDOT rural, non-freeway highways with posted speed limits of 55 mph and appropriate paved lane and shoulder widths. To date, 5,700 miles of centre-line rumble strips and 1,700 miles of shoulder rumble strips have been installed.

The study, conducted by the Wayne State University (WSU) Transportation Research Group, found significant reductions in several targeted categories of crashes, including head-on, side-swipe and run-off-the-road crashes. In the categories examined, the study showed a 47 per cent reduction in total crashes and a 51 percent reduction in fatal crashes.

According to the report, ''rumble strips are a proven and cost-effective countermeasure to lane departure crashes brought on by driver drowsiness, distraction, and/or inattention. We can project … this initiative in Michigan will result in an annual reduction of 337 crashes, saving 16 lives, and 62 serious injuries each year.''

In another facet of the study, researchers surveyed road users to gain insight into the public's perception of rumble strips. The survey indicated strong public support for the use of centre-line rumble strips. And the experts agreed: a survey of MDOT pavement design and maintenance personnel showed the majority of staff strongly agree that the installation of centre-line rumble strips improves safety.

"This study is one of the largest and most comprehensive investigations of effectiveness of any safety countermeasure that has ever been performed at a state level," said Tapan Datta, a WSU civil engineering professor and principal investigator of the research project.

"Analysing all of MDOT's two-lane high-speed highways with rumble strip treatments targeted to alleviate lane departure-related traffic crashes makes the results real and reliable. They can be used by other states to establish their own rumble strip programs."

Datta said future research should focus on use of rumble strips on two-lane county roads and multi-lane non-freeway high speed roads.

In addition, the report's economic analysis of the rumble strip program showed a high benefit-to-cost ratio. Depending on how the cost was spread out over time, the ratio was between 58:1 and 18:1. Researchers estimated a total safety benefit of more than US$79 million over three years.

A previous rumble strip study, completed in 2012, found that the presence of centre-line rumble strips improves driver performance in most conditions. Drivers position themselves more centrally in lanes, leading to fewer encroachments over centre-lines and shoulders, thus increasing safety. And while drivers generally tended to ride onto or across the centre-line when passing bicyclists, they did so less frequently when centre-line rumble strips were present. They also found that centre-line rumble strips did not contribute to short-term cracking in asphalt pavements. Further, rumble strips typically produced no more noise than that made by tractor-trailer trucks travelling on normal highways.

Related Content

  • February 1, 2012
    Progressing work zone safety systems
    David Crawford investigates progress in a key safety area - work zones. Highway construction zone safety is taken seriously enough in the US to merit a special spring National Work Zone Awareness Week, which in 2010 ran from 19-23 April. Headed by the US Department of Transportation's Federal Highway Administration (FHWA), this aims to reduce an annual toll of work zone deaths - 720 in 2008 (an average of one every 10 hours) with more than 40,000 traffic injuries (an average of one every 13 minutes).
  • February 6, 2012
    Progressing work zone safety systems
    David Crawford investigates progress in a key safety area - work zones
  • January 30, 2012
    Mounting benefits of dynamic tolling project
    Wisconsin's four-year HOT lanes pilot project, launched in May 2008, cost US$18.8 million to construct. Halfway into the project, which uses variably priced, or dynamic, tolling to improve highway efficiency, the benefits are mounting. The problem was obvious, and frustrating, to anyone who ever sat in bumper-to-bumper traffic on State Route 167 and watched a lone car whiz by every 20 seconds or so in the carpool lane. But for planners at the Washington State Department of Transportation, the conundrum was
  • October 5, 2016
    ITS boosts safety on Brazil’s Regis Bittencourt Highway
    Brazil’s incident-prone Regis Bittencourt Highway was once known as ‘the highway of death’ but investment in ITS systems has brought about some big improvements, as Mauro Nogarin discovers Between 2010 and the end of 2014, Brazil made major investments in traffic technology across its national highways with the result that the ITS network went from 4,963km of fibre optics to 8,524km and the number of cameras increased from 1,127 to 3,208.