Skip to main content

State DOTs using drones to improve safety, collect data and cut costs

A growing number of US state departments of transportation are leveraging innovative drone technology to creatively improve safety, reduce traffic congestion and save money. According to a March 2016 survey by the American Association of State Highway and Transportation Officials (AASHTO), 33 state departments of transportation have or are exploring, researching, testing or using unmanned aerial vehicles, commonly referred to as drones, to inspect bridges and assist with clearing vehicle crashes, among othe
March 29, 2016 Read time: 2 mins
A growing number of US state departments of transportation are leveraging innovative drone technology to creatively improve safety, reduce traffic congestion and save money. According to a March 2016 survey by the 4944 American Association of State Highway and Transportation Officials (AASHTO), 33 state departments of transportation have or are exploring, researching, testing or using unmanned aerial vehicles, commonly referred to as drones, to inspect bridges and assist with clearing vehicle crashes, among other innovative applications.

AASHTO's latest poll comes on the heels of a joint survey of members of the AASHTO Standing Committee on Aviation and the Standing Committee on Highways conducted in the summer of 2015, which documented growing interest in drone technology.

This spring, Michigan State Department of Transportation (MDOT) is set to begin a two-year UAV study; phase two of an 18-month UAV study completed by MDOT and the Michigan Tech Research Institute in 2014.

MDOT engineer of operations and maintenance Steven J. Cook says UAVs are a safe, reliable and cost-effective way to monitor traffic flows, obtain photos from inside confined spaces and gather data on bridge conditions.

"Our first study looked at the viability (of UAV's) and what we found out is that the unmanned aerial vehicle provided a mechanism to keep our workers out of harm's way," Cook said.  "A traditional bridge inspection for example typically involves setting up work zones, detouring traffic and using heavy equipment. The UAV's can get in and get out quickly, capturing data in near real-time and causing less distraction and inconvenience to drivers."

MDOT estimates that a standard bridge deck inspection takes eight hours, a crew of four people and heavy equipment; costing at an estimated US$4,600. The same inspection with a drone takes two people, just two hours at an estimated cost of US$250.

"We've been looking into drones for some time," says Cassandra Isackson, director of aeronautics at Minnesota Department of Transportation (MnDOT).  "In addition to operating the highway system MnDOT is in charge of aviation as well, so we've been looking at drones from the perspective of commercial operators, businesses, everyone out there using them. The highway side of MnDOT has been exploring them for potential cost savings for things like bridge inspections, surveying, and aerial photography."

For more information on companies in this article

Related Content

  • Regional, national managed enforcement for developing nations
    February 3, 2012
    Robot is offering nationwide enforcement services to both developed and developing countries.
  • UK's Hindhead tunnel pushes the boundaries of traffic management
    January 23, 2012
    The new Hindhead Tunnel is the first in the UK to use radar-based incident detection. Paul Arnold, project manager with the Highways Agency, talks about the project. The comparatively remote location of the A3 Hindhead Tunnel has resulted in it becoming one of the most sophisticated in the UK in terms of monitoring and control systems, according to Paul Arnold, project manager for the Highways Agency (HA), which manages strategic roads in England and Wales. It is the first tunnel in the UK to use radar for
  • NHTSA to release monthly ADS data
    June 17, 2022
    First safety reports now available for SAE Level 2 and Levels 3-5 automated driving systems
  • New Mexico DOT launches virtual road planning
    January 8, 2013
    Planning for the road ahead is something the New Mexico Department of Transportation (DOT) takes literally, as the department oversees the planning, design, construction and maintenance of 30,000 lane miles of highways, 3,500 bridges as well as the state's transit and rail operations, while keeping costs and environmental concerns in mind during the planning stages. To assist with the development of infrastructure projects, the department will roll out cloud-based building information modeling software late