Skip to main content

Spanish rail accident ‘could be the result of over-speed’

Investigations continue into the cause of the train crash approaching the Spanish city of Santiago de Compostela, but suggestions that the train was travelling too fast appear to be gaining weight. Officials say one of the train's drivers has been put under formal investigation. The president of railway firm Renfe, Julio Gomez Pomar, has said the train in the crash had no technical problems. "The train had passed an inspection that same morning. Those trains are inspected every 7,500km... Its maintenance r
July 26, 2013 Read time: 3 mins
Investigations continue into the cause of the train crash approaching the Spanish city of Santiago de Compostela, but suggestions that the train was travelling too fast appear to be gaining weight.

Officials say one of the train's drivers has been put under formal investigation.

The president of railway firm Renfe, Julio Gomez Pomar, has said the train in the crash had no technical problems.  "The train had passed an inspection that same morning. Those trains are inspected every 7,500km... Its maintenance record was perfect," he told Spanish radio.

However, Sim Harris, managing editor of Rail News, and a leading rail expert, said modern railway networks were designed to prevent trains running out of control and was puzzled that the train was not slowed down by modern automatic protection systems.

One of the drivers, who was trapped in the cab of the train after the accident, is quoted as saying moments after the crash that the train had taken the curve at 190 km/h (118mph) when entering the curve, unidentified investigation sources have told Spanish media. The speed limit on that section of track is 80km/h.

Two UK experts have both said that travel is generally a safe mode of travel.  Peter Sheppard from 6674 The Institution of Engineering and Technology said: “However, and this is based on news reports only, it would seem that both are as a result of human error and not the technology involved.  Based on the first reports it seems to be as a result of a significant over-speed (although there could well be other factors as what is perceived by passengers is sometime different to reality).
 
“What has to happen when the enquiries are complete is to determine if there is any methods by which technology could have intervened, prevented or given early warning of these accidents and either supported the infrastructure maintenance teams or advised/intervened in the cab.”

Philippa Oldham, head of transport at the 5025 Institution of Mechanical Engineers, said in response to the accident: “It is still too early to say with any certainty exactly what happened to cause the tragic events in north west Spain on Wednesday, but accident investigators are likely to be looking at a number of factors which could have caused or contributed to this accident.

“They will be looking at the role of the signalling and speed advice system, as well as the role of the driver. Rail travel remains one of the safest ways to travel, with far fewer deaths and injuries than other forms of transport such as car travel.”

Related Content

  • October 24, 2014
    Workzone safety can be economically viable
    David Crawford looks how workzone safety can be ‘economically viable’. Highway maintenance is one of the most dangerous construction industry occupations in Europe. Research from The Netherlands on fatal crashes indicates that the risk facing road workzone operatives is ‘significantly higher’ than that for the general construction workforce. A survey carried out by the Highways Agency, which runs the UK’s motorway and trunk road network, has suggested that 20% of road workers have suffered injuries from pa
  • January 27, 2012
    Ramp metering delivers - again
    Though still controversial, ramp metering, which has been around for nearly 50 years, continues to deliver substantial benefits, and generally for relatively small cost. Kansas City is a case in point. In March 2010, Kansas City Scout, a partnership between the Missouri and Kansas Departments of Transportation to provide ITS for the greater Kansas City Area, activated the first ramp metering system in the region. The project is located on an 8.85km (5.5 mile) section of Interstate 435 from Metcalf Avenue to
  • June 20, 2016
    Regulating rural road use
    David Crawford looks at problems facing indigenous communities and those unfamiliar with driving in rural areas. While it is well known that the fatality rate for road crashes in rural areas is higher than in towns and cities, some groups suffer far more than others. For instance, the rates of death and serious injury from vehicle accidents is much higher for American Indian and Alaska Native (AI and AN) populations living in rural tribal lands than for any of the country’s other ethnic populations. Crashes
  • July 7, 2017
    Bristol’s buses trial CycleEye detection system
    Fusion Processing’s Jim Hutchinson looks at a two-year trial of the company’s cyclist detection system. Is cycling in a city dangerous? Well, that depends where you are and how you view statistics. Malmö is far more bike-friendly than Mumbai and the risk can either be perceived as small - one death per 29 million miles cycled in the UK in 2013 - or large - that equated to 109 deaths in the same year. Whatever your personal take on the data, the effect of these accidents can be felt indirectly too. News of c