Skip to main content

Spanish rail accident ‘could be the result of over-speed’

Investigations continue into the cause of the train crash approaching the Spanish city of Santiago de Compostela, but suggestions that the train was travelling too fast appear to be gaining weight. Officials say one of the train's drivers has been put under formal investigation. The president of railway firm Renfe, Julio Gomez Pomar, has said the train in the crash had no technical problems. "The train had passed an inspection that same morning. Those trains are inspected every 7,500km... Its maintenance r
July 26, 2013 Read time: 3 mins
Investigations continue into the cause of the train crash approaching the Spanish city of Santiago de Compostela, but suggestions that the train was travelling too fast appear to be gaining weight.

Officials say one of the train's drivers has been put under formal investigation.

The president of railway firm Renfe, Julio Gomez Pomar, has said the train in the crash had no technical problems.  "The train had passed an inspection that same morning. Those trains are inspected every 7,500km... Its maintenance record was perfect," he told Spanish radio.

However, Sim Harris, managing editor of Rail News, and a leading rail expert, said modern railway networks were designed to prevent trains running out of control and was puzzled that the train was not slowed down by modern automatic protection systems.

One of the drivers, who was trapped in the cab of the train after the accident, is quoted as saying moments after the crash that the train had taken the curve at 190 km/h (118mph) when entering the curve, unidentified investigation sources have told Spanish media. The speed limit on that section of track is 80km/h.

Two UK experts have both said that travel is generally a safe mode of travel.  Peter Sheppard from 6674 The Institution of Engineering and Technology said: “However, and this is based on news reports only, it would seem that both are as a result of human error and not the technology involved.  Based on the first reports it seems to be as a result of a significant over-speed (although there could well be other factors as what is perceived by passengers is sometime different to reality).
 
“What has to happen when the enquiries are complete is to determine if there is any methods by which technology could have intervened, prevented or given early warning of these accidents and either supported the infrastructure maintenance teams or advised/intervened in the cab.”

Philippa Oldham, head of transport at the 5025 Institution of Mechanical Engineers, said in response to the accident: “It is still too early to say with any certainty exactly what happened to cause the tragic events in north west Spain on Wednesday, but accident investigators are likely to be looking at a number of factors which could have caused or contributed to this accident.

“They will be looking at the role of the signalling and speed advice system, as well as the role of the driver. Rail travel remains one of the safest ways to travel, with far fewer deaths and injuries than other forms of transport such as car travel.”

Related Content

  • May 29, 2013
    City Safety reduces low speed accidents on Volvo’s XC60 and S60
    It was four years ago that Volvo introduced its City Safety collision avoidance system which is designed to reduce the number and severity of low-speed accidents to the US market. However, a study in America by the Highway Loss Data Institute (HLDI) has shown that the results may not be as good as initially indicated by an earlier report. According to Volvo, statistics show that 75% of reported collisions occur at speeds of up to 30km/h (18.6mph) typically in urban traffic and in slow-moving traffic queues
  • February 1, 2012
    Progressing work zone safety systems
    David Crawford investigates progress in a key safety area - work zones. Highway construction zone safety is taken seriously enough in the US to merit a special spring National Work Zone Awareness Week, which in 2010 ran from 19-23 April. Headed by the US Department of Transportation's Federal Highway Administration (FHWA), this aims to reduce an annual toll of work zone deaths - 720 in 2008 (an average of one every 10 hours) with more than 40,000 traffic injuries (an average of one every 13 minutes).
  • February 6, 2012
    Progressing work zone safety systems
    David Crawford investigates progress in a key safety area - work zones
  • April 8, 2014
    German authorities use CB-radio message to reduce accidents in roadworks
    Citizen Band radio is proving useful to prevent accidents in Germany’s roadworks. In common with other German Länder (federal regions) with large volumes of commercial vehicles using their trunk road networks, Bavaria had been experiencing high levels of road traffic accidents (RTAs) involving heavy trucks in the vicinity of minor motorway maintenance sites. This was despite the extensive visual warning regulations published in the German federal road safety audit (RSA) guidelines for the protection of site