Skip to main content

SolarBright’s studs send ice warning to drivers

A new smart road stud from New Zealand-based company SolarBright can warn drivers of potentially icy roads and will soon be able to alert traffic management centres and maintenance depots of the treacherous conditions. Once installed in the road the solar-powered studs monitor humidity and temperature and if the temperature drops to 4°C or below the blue LEDs in the stud start to flash to alert drivers of the possibility of ice formation.
March 26, 2014 Read time: 2 mins
SolarBright’s snow-plough resistant and standard and ice warning studs
A new smart road stud from New Zealand-based company 7618 Solar Bright can warn drivers of potentially icy roads and will soon be able to alert traffic management centres and maintenance depots of the treacherous conditions.

Once installed in the road the solar-powered studs monitor humidity and temperature and if the temperature drops to 4°C or below the blue LEDs in the stud start to flash to alert drivers of the possibility of ice formation. There are two versions of the stud – a direct replacement for the standard reflective stud (and around twice the price) and a snow-plough resistant version which is set into a core drilled hole.

With the additional space available in the show-plough version, the company is trialing a communications system that will send a signal to the traffic control centre when it is activated to inform the maintenance department about where gritters need to be deployed.

The snow-plough version will run for 700 hours on the battery pack while the standard version will run for 400 hours. As the system remains dormant for most of the year the battery pack will last for five to seven years.

While the products is yet to be type-approved, on-road trials of the technology are underway in New Zealand and the system has been installed in car parks, airports and other off-road facilities around the world.
%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 4 93243 0 oLinkAsset <span class="mouselink">www.solarbright.co.nz</span> Solar Bright web false /EasySiteWeb/GatewayLink.aspx?alId=93243 false false%>

For more information on companies in this article

Related Content

  • Stalker shows LidarCam II and Pole Mounted Graphical display
    March 21, 2018
    Stalker Radar is introducing two new products of interest to Intertraffic attendees involved in traffic control, the LidarCam II and the Pole Mounted Graphical (PMG) display. The LidarCam II has many important features including the largest color touchscreen display and superior low-light sensitivity. Its 1,200-metre laser range, autofocus, and auto zoom lens assure the utmost versatility, while built-in Bluetooth, wireless evidence off-loads, and long-life Li-Ion battery add convenience and efficiency to
  • Hawaii wins more than $400,000 in EPA Grants
    November 27, 2018
    The US Environmental Protection Agency (EPA) has awarded $411,578 in Diesel Emission Reduction Act (DERA) grants to Hawaii to help curb pollution from diesel vehicle sources. The EPA’s West Coast Collaborative administers the DERA programme. This partnership, which combines the EPA’s Pacific Southwest and Pacific Northwest Regions, utilises public and private funds in a bid to reduce emissions. The Hawaii Department of Health (HDOH) intends to use the grant to replace two diesel transit buses with batter
  • Evolis launches AVANSIA crystal clear card printer with a 600 dpi resolution at CARTES 2013
    November 19, 2013
    On-demand card printer Evolis is using CARTES 2013 to introduce AVANSIA, a new printer loaded with all the latest retransfer technology. With the retransfer system on AVANSIA, “card printing is performed in two steps”, says Evolis. “First, the card layout is printed through thermal transfer; then the print layer is transferred from the film to the card.” And, says Evolis, the entire surface of the card comes out “crystal clear with text, microprints and watermarks in 600 dpi resolution.”
  • Last date for ITS World Congress papers - reminder
    January 6, 2015
    The deadline for the ITS World Congress 2015 Call for Papers and Special Interest Sessions submission is fast approaching. Authors must submit technical, scientific, commercial papers and special interest sessions by 19 January. No extensions will be granted.