RetroTek-MU certified as dynamic mobile retroreflectometer

The RetroTek-MU (RTM) has been certified to ASTM E 1710 standard as a dynamic mobile retroreflectometer, according to testing, monitoring and certification association for road-owners, StrAus-Zert (SAZ). It is capable of measuring road markings / striping across the full width of a traffic lane simultaneously in one pass at traffic speeds up to 75mph and can be operated by one driver. The assessment, carried out by SAZ's Dr Hans-Hubert Meseberg, also confirmed that the RTM
October 13, 2017 Read time: 2 mins

The RetroTek-MU (RTM) has been certified to ASTM E 1710 standard as a dynamic mobile retroreflectometer, according to testing, monitoring and certification association for road-owners, StrAus-Zert (SAZ). It is capable of measuring road markings / striping across the full width of a traffic lane simultaneously in one pass at traffic speeds up to 75mph and can be operated by one driver.

The assessment, carried out by SAZ's Dr Hans-Hubert Meseberg, also confirmed that the RTM is capable of measuring the night visibility of road / lines striping on the right and left including the lane markings in its centre.

Dr Meseberg added that its measuring system provides the same measured values of the coefficient of retroflected luminance RL as a portable, handheld measuring device, within the scope of an acceptable measuring accuracy. In addition, the coefficient of retroreflected luminance RL can be detected with a good measuring accuracy by the measuring system RTM, independent of the measuring velocity.

In his overall assessment, Dr Meseberg stated that the deviations of the measurement results are low, considering that the measuring conditions cause inaccuracies that are not a result of the device itself. These conditions include measuring areas, uneven marking surface, non-homogenous structure of the marking surface and non-homogenous bead distribution.

Related Content

  • April 26, 2013
    ITS asset management matters
    Maintenance of on-road ITS kit needs to become more sophisticated; while new technologies can deliver better road maintenance. David Crawford investigates both sides of the issue "Good information is key to effective ITS asset maintenance,” says Ian Routledge of the Ian Routledge Consultancy (IRC), whose Imtrac (Information Management for TRAffic Control) system is poised for European expansion. Developed as an ‘intelligent filing cabinet’ for storing information about on-road equipment, the online database
    Read More
  • August 12, 2015
    Dynamic Message Signs : Don’t replace, refurbish and upgrade
    Refurbishing old dynamic message signs can save money and increase technical capabilities as David Crawford discovers. Evidence is growing on both sides of the Atlantic of the scope for retrofitting old or technically out-of-date dynamic message signs (DMS) with new electronic equipment, to save on the costs of installing full-scale replacements. In the last four months of 2014, a number of US states progressed programmes that achieved savings of more than US$1.75 million (€1.56million).
    Read More
  • May 24, 2016
    High-speed WIM moves onto the main highway
    High-speed weigh-in-motion is starting to make its mark on both sides of the Atlantic. As a transit country the Czech Republic experiences a large number of overloaded vehicles, which greatly increase highway maintenance costs. This prompted its Transport Ministry to trial an extension of the capabilities of the existing truck tolling system to allow the dynamic high-speed weighing of cargo vehicles. In effect the tolling enforcement gantries become weigh-in-motion (WIM) locations.
    Read More
  • July 17, 2012
    Development of cooperative driving applications for work zones
    The German AKTIV project is researching several cooperative driving applications for use in work zones. PTV's Michael Ortgiese details progress. The steep increases in traffic volumes predicted back in the early 1990s have unfortunately been proven to be more than accurate. In Germany, the AKTIV project continues to look into cooperative technologies' potential to reduce the impact of those increased traffic volumes and keep traffic moving despite limitations in infrastructure capacity.
    Read More

Highlighted Content