Skip to main content

Rail industry, regulators debate feasibility of PTC

US rail industry officials and federal accident regulators have disagreed about the viability of a looming mandate that most US railways be equipped with automated control systems by the end of next year. Congress is requiring that most major railroad companies install automated systems known as positive train control (PTC) by December 2015. Automated train systems have gained renewed attention after a spate of high-profile accidents on passenger and freight railways, including most recently a Decem
March 10, 2014 Read time: 3 mins

US rail industry officials and federal accident regulators have disagreed about the viability of a looming mandate that most US railways be equipped with automated control systems by the end of next year.

Congress is requiring that most major railroad companies install automated systems known as positive train control (PTC) by December 2015.

Automated train systems have gained renewed attention after a spate of high-profile accidents on passenger and freight railways, including most recently a December derailment of a freight train in North Dakota that resulted in 400,000 gallons of crude oil being spilled.

The law requiring the implementation of automated train control systems by 2015 has been on the books since 2008.

However, Association of American Railroads President Ed Hemberger told members of the Senate Commerce, Science and Transportation Committee that the automated systems have proven to be more difficult to install than regulators imagined.

"PTC is an unprecedented challenge, both in terms of the technologies to be used and the integration of those technologies," Hemberger told the panel in testimony submitted before Thursday's hearing.

"The railroad industry began working several years ago with the 2115 Federal Communications Commission (FCC) to licence the wireless spectrum necessary for PTC,” he said.  However, under the FCC’s interpretation of Section 106 of the National Historic Preservation Act (NHPA), railroads must ascertain, on an antenna-by-antenna basis, if the antennas will negatively impact areas of historic, cultural, or religious significance.

Hemberger said the railroads were in agreement with federal regulators about the importance of installing automated train control systems to boost safety.  But the rail association chief said the only solution to the challenges facing the train industry was to push back the 2015 deadline for them to automate.

"The bottom line is that without further changes to the FCC approval process, the timeline for ultimate deployment of PTC will be delayed significantly," Hemberger said.

5628 National Transportation Safety Board (NTSB) Vice Chairman Chris Hart said the safety benefits of automating trains should outweigh the rail industry's technical concerns.

"Implementation of PTC systems was included on the NTSB’s Most Wanted List when the list was First published in 1990 and has remained on the list almost continuously since that time," Hart said. "We may never eliminate human error from the railroad system, but PTC provides a level of redundancy to protect trains and those on board when human factors, such as distraction or fatigue, might otherwise set an accident sequence into motion." 

For more information on companies in this article

Related Content

  • Driver training saves lives, increases profits, reduces costs
    February 6, 2012
    An innovative UK Government initiative on work-related driver training has resulted in astonishing success, not only in terms of government objectives, but also in substantial cost-benefits for companies and public sector authorities participating in the scheme: they save lives and increase profits/reduce costs Here, we present an overview of the initiative and, overleaf, provide a detailed cost-benefit analysis which amply illustrates why it has been enthusiastically embraced by industry and the public sec
  • UK freight trains to be upgraded with European Train Control Systems
    December 20, 2017
    Network Rail has contracted Siemens Rail Automation to install European Train Control System (ETCS) in-cab signalling on 750 of the UK's heaviest locomotives to improve safety and provide better use of the network with plans to retrofit the entire fleet in 2022. This technology forms part of the country's Digital Railway programme, and the government has invested £450m ($602m) as part of its National Productivity Fund. For the first phase, Siemens will install its Trainguard 200 (T200) ETCS on-board
  • Infrastructure spending is an investment in economic recovery
    January 20, 2012
    Transportation funding is caught in the crossfire as the President calls for infrastructure investment and a reinvigorated Republican majority in the House pushes back on federal spending. Andrew Bardin Williams reports. Every few months some politician or pundit declares that the country is on the verge of making the most important political decision in a generation. The 2006 mid-term election; the 2008 Presidential election; the passing of the stimulus bill; healthcare reform; the mania surrounding Tea Pa
  • DSRC? ‘It’s become a faith-based thing’
    March 2, 2021
    The US FCC’s decision on 5.9GHz led to Applied Information offering DSRC buybacks to DoTs. Bryan Mulligan tells Adam Hill that we now just need to get on and roll out CV technology...