Skip to main content

Millbrook Group announces expansion of year-round testing at Test World

Millbrook Group has announced an expansion of its Test World tyre testing site in Finland. The project will increase the capacity for testing on natural snow and ice and introduce wet and dry braking, aquaplaning and split friction surfaces.
June 19, 2017 Read time: 2 mins

Millbrook Group has announced an expansion of its Test World tyre testing site in Finland. The project will increase the capacity for testing on natural snow and ice and introduce wet and dry braking, aquaplaning and split friction surfaces.

Customers can already test tyres and vehicles on natural snow at Test World twelve months of the year. The site currently has two indoor winter test facilities which can be used in the milder months when the outdoor snow and ice tracks are not available. The proposed expansion will create three additional indoor areas, doubling the amount of indoor testing space.

The wet and dry braking facility will open Test World to a new market, attracting customers who wish to test winter tyres on wet and dry surfaces as well as on snow and ice. The length of the extended facility will allow Test World to test brakes on passenger cars at higher speeds than possible in the existing space. The adjustable temperature and humidity will give an advantage to development, certification and labelling testing for tyres by allowing greater environmental control.

Once complete, the laboratory will provide the majority of objective tests required by tyre manufacturers at one facility, year-round. The results of tests conducted indoors on natural snow at Test World are comparable to outdoor results, and so tyre manufacturers now have more of an appetite for such tests. New garages will be added as part of the expansion to support the increased number of tests.

Related Content

  • January 24, 2017
    Harnessing the strengths of CMOS for ITS applications
    Sony’s Arnaud Destruels explains the benefits of CMOS sensors for ITS applications. In the transport sector roadside, trackside and platform cameras were devices for viewing and assessing a situation while individual sensors did all the clever stuff like traffic counting, speed calculation, queue lengths, signal status and so on. Well, not any more.
  • July 26, 2017
    Lufft launches new weather sensor for gard to reach locations
    Weather measuring equipment manufacturer Lufft has launched StaRWIS, a new easy-to-install and compact stationary sensor for road weather information systems based on a non-invasive, spectroscopic measuring standard. Designed for hard-to-reach or critical locations, the sensor is installed at a height between five and six metres and provides road and dew point temperatures, water film height, road conditions (dry, wet, ice, snow, critical and chemically wet), relative humidity, ice percentage and friction.
  • July 27, 2012
    In vehicle systems allow drivers to provide travel information
    The use of a Vehicle Data Translator will allow every vehicle on a given segment of road to contribute to a highly accurate, readily accessible source of localised weather information, thus improving safety in all conditions. Sheldon Drobot and William P. Mahoney III, US National Center for Atmospheric Research, Paul A. Pisano, USDOT/Federal Highway Administration, and Benjamin B. McKeever, USDOT/Research and Innovative Technology Administration, write. On the morning of June 10 2009, under the cover of den
  • January 25, 2012
    Parking - does it cause or cure congestion?
    Does parking cause congestion, or can it help alleviate the problem? By John Van Horn