Major intelligent road stud deployment

More than 21,000 Astucia SolarLite F series embedded intelligent road studs with built-in solar-powered light-emitting diodes are being deployed on two of the busiest sections of the A2 trunk route near the port of Dover, in Kent, England.
January 30, 2012 Read time: 1 min
More than 21,000 1875 Astucia SolarLite F series embedded intelligent road studs with built-in solar-powered light-emitting diodes are being deployed on two of the busiest sections of the A2 trunk route near the port of Dover, in Kent, England.

The aim is to improve night-time road safety with enhanced full lane and edge delineation on both stretches of dual carriageway which are also prone to fog and mist. Being within a conservation area, alternative measures, such as traditional street lighting, were neither viable nor cost-effective options.

The Astucia SolarLite intelligent road studs automatically illuminate from dusk to dawn and provide drivers with up to 900m of visibility; 10 times greater than the traditional, retro-reflective, passive road stud which is limited by the headlight beam of the vehicle. With the increased visibility of the studs, driver reaction time to a potential hazard in the road ahead is increased from 3.2 to over 30 seconds, when driving at 100km/h.

For more information on companies in this article

Related Content

  • Technology trial a first for roads scheme
    April 7, 2016
    A US$124.8 million (£88.4 million) project to upgrade access to one of the UK’s busiest ports is trialling the use of technology to improve the monitoring of highway equipment located along the road, such as street lighting and drainage, to aid future maintenance. Contractors working on the A160 Port of Immingham improvement scheme are using the RedBite asset tool, developed by a Cambridge-based company, to tag Highways England owned assets. RedBite is a spin-out from the University of Cambridge and a m
    Read More
  • High-speed WIM moves onto the main highway
    May 24, 2016
    High-speed weigh-in-motion is starting to make its mark on both sides of the Atlantic. As a transit country the Czech Republic experiences a large number of overloaded vehicles, which greatly increase highway maintenance costs. This prompted its Transport Ministry to trial an extension of the capabilities of the existing truck tolling system to allow the dynamic high-speed weighing of cargo vehicles. In effect the tolling enforcement gantries become weigh-in-motion (WIM) locations.
    Read More
  • Financing the US road infrastructure – road user charging?
    February 2, 2012
    In the US, the National Transportation Infrastructure Financing Commission's report to Congress will state that a national, distance-based charging is the only long-term solution to the country's infrastructure financing problems. The Commission's Chair, Rob Atkinson, talks to ITS International
    Read More
  • Financing the US road infrastructure – road user charging?
    February 2, 2012
    In the US, the National Transportation Infrastructure Financing Commission's report to Congress will state that a national, distance-based charging is the only long-term solution to the country's infrastructure financing problems. The Commission's Chair, Rob Atkinson, talks to ITS International
    Read More

Highlighted Content