Skip to main content

Major intelligent road stud deployment

More than 21,000 Astucia SolarLite F series embedded intelligent road studs with built-in solar-powered light-emitting diodes are being deployed on two of the busiest sections of the A2 trunk route near the port of Dover, in Kent, England.
January 30, 2012 Read time: 1 min
More than 21,000 1875 Astucia SolarLite F series embedded intelligent road studs with built-in solar-powered light-emitting diodes are being deployed on two of the busiest sections of the A2 trunk route near the port of Dover, in Kent, England.

The aim is to improve night-time road safety with enhanced full lane and edge delineation on both stretches of dual carriageway which are also prone to fog and mist. Being within a conservation area, alternative measures, such as traditional street lighting, were neither viable nor cost-effective options.

The Astucia SolarLite intelligent road studs automatically illuminate from dusk to dawn and provide drivers with up to 900m of visibility; 10 times greater than the traditional, retro-reflective, passive road stud which is limited by the headlight beam of the vehicle. With the increased visibility of the studs, driver reaction time to a potential hazard in the road ahead is increased from 3.2 to over 30 seconds, when driving at 100km/h.

For more information on companies in this article

Related Content

  • High-res traffic data provides planners with the big picture
    November 5, 2015
    Road authorities have a lot to gain from high-resolution traffic data, argues Pravin Varaiya. Traffic engineers have traditionally been forced to operate with limited data regarding the performance of their arterials. Traffic studies are often commissioned once every three years, over a few days, to get an updated estimate of utilization.
  • Bogotá’s affordable path to safer roads
    April 28, 2022
    Enforcing speed limits on key corridors is a cost-effective way of reducing collisions in the Colombian capital, say the authors of a new study. Andrew Stone talks to them
  • Teledyne Flir: here’s how to find the right ITS camera
    January 4, 2022
    From lighting to weather, there are so many elements which need to be taken into account when choosing a camera for ITS operations. Riana Sartori from Teledyne Flir offers a buyer’s guide
  • Proin makes work zones safer
    March 25, 2014
    Spanish company Proin manufactures a range of products for work zones. Its PROINbal brand encompasses road delineators, cylindrical bollards, polyethylene barriers, road studs, beam and concrete barrier reflectors, speed bumps, cones and other luminous devices.