Major intelligent road stud deployment

More than 21,000 Astucia SolarLite F series embedded intelligent road studs with built-in solar-powered light-emitting diodes are being deployed on two of the busiest sections of the A2 trunk route near the port of Dover, in Kent, England.
January 30, 2012 Read time: 1 min
More than 21,000 1875 Astucia SolarLite F series embedded intelligent road studs with built-in solar-powered light-emitting diodes are being deployed on two of the busiest sections of the A2 trunk route near the port of Dover, in Kent, England.

The aim is to improve night-time road safety with enhanced full lane and edge delineation on both stretches of dual carriageway which are also prone to fog and mist. Being within a conservation area, alternative measures, such as traditional street lighting, were neither viable nor cost-effective options.

The Astucia SolarLite intelligent road studs automatically illuminate from dusk to dawn and provide drivers with up to 900m of visibility; 10 times greater than the traditional, retro-reflective, passive road stud which is limited by the headlight beam of the vehicle. With the increased visibility of the studs, driver reaction time to a potential hazard in the road ahead is increased from 3.2 to over 30 seconds, when driving at 100km/h.

For more information on companies in this article

Related Content

  • Can GNSS solve the tolling world’s woes?
    December 5, 2013
    Kapsch’s Arno Klamminger and Wolfgang Fleischer consider the need for an agnostic approach to technology for charging and tolling. Periodically, given the march of technology, it is worth pausing and taking stock of where we have got to and where we go next. Such reflections are necessary if we are to take full advantage of what we have at our disposal and, potentially, avoid decisions which push us down technological culs de sac. A look at the use of Global Navigation Satellite System (GNSS)-based technol
    Read More
  • Cost-effective alternatives to traditional loops
    February 1, 2012
    Traffic signal control is a mainstay of urban congestion management. Despite advances in vehicle detection sensors, inductive loops, which operate by using a magnetic field to detect the metal components in vehicles, are still the most common enabler for intelligent signalised junctions.
    Read More
  • Kent deploys PIPS JTMS systems
    June 25, 2012
    PIPS Technology has supplied and installed two Journey Time Measurement Systems (JTMS) in Gravesend and Tunbridge Wells for Kent Highway Services (KHS) in the UK. There are 21 different camera sites featuring a total of 34 PIPS P372 integrated Spike Automatic Number Plate Recognition (ANPR) cameras spread across the two individual project locations, all of which are on single-lane carriageways. The cameras, linked via wireless communications to the JTMS software, read the number plate of every vehicle that
    Read More
  • Coded exchanges
    July 24, 2012
    For many, Ethernet- and IP-based networks are the cast-iron solution to ITS's communications needs. However, there remain issues from manufacturer to manufacturer with interpretation of what are supposed to be common standards The 'promise' of Ethernet was that different devices such as IP video cameras and traffic signals could be easily integrated into communications networks, simplifying the process of transporting data over copper, fibre or wirelessly. However, although Ethernet devices have come to pre
    Read More

Highlighted Content