Laser Technology exhibits TruCapture system

Laser Technology is exhibiting its latest TruCapture and TruSense systems on its booth. TruCapture uses expanding optics to create an elongated laser beam with an optimum detection range of between 66 and 164ft (20 and 50m) and speed measurements are accurate within 3mph (5km/h) in traffic management mode and 1mph (1.6km/h) in enforcement mode.
September 10, 2014 Read time: 1 min
ITSWC 2014 Master Avatar

1777 Laser Technology is exhibiting its latest TruCapture and TruSense systems on its booth.

TruCapture uses expanding optics to create an elongated laser beam with an optimum detection range of between 66 and 164ft (20 and 50m) and speed measurements are accurate within 3mph (5km/h) in traffic management mode and 1mph (1.6km/h) in enforcement mode.

In single laser configuration TruSense system can act as a vehicle detector, a red light camera trigger and general data capture. In twin-laser configuration it can also capture vehicle speed and profile and the distance between vehicles.

 %$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 4 52688 0 oLinkExternal www.lasertech.com Visit Laser Technology Website false /EasySiteWeb/GatewayLink.aspx?alId=52688 false false%>

For more information on companies in this article

Related Content

  • Pole mounted safety solution minimises vehicle damage, injuries
    February 26, 2014
    The product consists of a metal box installed under urban equipment, such as streetlamps, pillars, and signposts. In the event of an impact from a vehicle, the equipment will release very easily so damage to the bodywork will be minimised, as will injuries and human losses.
    Read More
  • Flexible LED lighting for all applications
    February 26, 2014
    The Agmi Area Lighting system can be used in many different applications by changing the lens photometry that is located on the modules. One of the main advantages is that the lumen output of each individual module can be controlled separately.
    Read More
  • CAMEA WIM is type approved and turnkey for weigh-in-motion
    October 23, 2012
    CAMEA WIM, developed and manufactured by CAMEA image and signal processing, is a turnkey solution for weigh-in-motion applications, from traffic reports to enforcement. According to CAMEA, the high speed system allows vehicles thought to be overloaded to be pre-selected and directed to a precise weigh station without impact on traffic flow. The CAMEA WIM – type approved for weight enforcement in the Czech Republic – also provides rich sets of traffic data in database format for export in standard formats.
    Read More
  • PDTS highlight Wallbox vehicle charging system at ITS World Congress
    September 26, 2012
    Austrian company PDTS will highlight its Wallbox PC 310/320, an intelligent, network- and customer-friendly electric vehicle (EV) charging system for the private and semi-public sector. Using type 1 and 2 e-mobility connectors to ensure broad charge compatibility, the configuration of the PC 310/320 is standard IEC 61851-1 compliant with Mode 3 charging, enabling safe and convenient charging of electric vehicles at speeds much faster than conventional electrical outlets.
    Read More

Highlighted Content