Kistler WIM innovation wins accreditation

A major weigh-in-motion (WIM) innovation being featured here at the ITS World Congress by Kistler has already won accreditation from the International Organisation of Metrology (OIML). To address the ever increasing problem of road surface damage caused by heavy transport, WIM systems employing Kistler quartz sensors have been delivering valuable traffic data for many years. There is also a long tradition in using WIM for preselection of overloaded vehicles.
October 7, 2015 Read time: 2 mins
Tomáš Pospíšek of Kistler

A major weigh-in-motion (WIM) innovation being featured here at the ITS World Congress by 657 Kistler has already won accreditation from the International Organisation of Metrology (OIML).

To address the ever increasing problem of road surface damage caused by heavy transport, WIM systems employing Kistler quartz sensors have been delivering valuable traffic data for many years. There is also a long tradition in using WIM for preselection of overloaded vehicles.

However, Kistler says the chain has been missing the last link that would allow road authorities to implement automatic enforcement based on vehicle weight data or to introduce toll-by-weight models in a free-flow environment. This growing demand for certified WIM systems compliant with international standards has been recently met by Kistler’s OIML-certified WIM technology.

The company is the first WIM manufacturer to have received the International Organisation of Metrology (OIML) R-134 certificate for vehicle weighing with strip sensors. Supported by this certificate, Kistler WIM systems based on maintenance-free Lineas quartz WIM sensors and the Kistler WIM data logger can now be used for legal applications.

In the world of international WIM standards, Kistler says there is a significant difference in the definition of the accuracy classes. While COST323 and ASTM E1318 state that only 95% of WIM measurements need to fulfil the declared accuracy, the OIML requires all (100%) measurements to be in the requested accuracy class.

The Kistler WIM system meets OIML accuracy F5 meaning that for initial verification all errors are below ±2.5 % and during standard operation the system has a measurement error smaller than ±5%.

For more information on companies in this article

Related Content

  • Underinvestment in infrastructure threatens economic growth
    January 24, 2012
    The 2011 Urban Mobility Report from the Texas Transportation Institute highlights the dangers of continued underinvestment in transportation infrastructure but also offers some hope in terms of possible solutions
    Read More
  • Xerox automates HOV/HOT enforcement
    May 27, 2014
    Counting the number of people in a vehicle has always been a manual task, but now Xerox has developed a real-time system to automate the process. Xerox has introduced an automated system that determines the number of passengers in a vehicle, enabling authorities to detect non-qualifying drivers using the High Occupancy Vehicle (HOV) and High Occupancy Toll (HOT) lanes. Traditionally HOV/HOT enforcement has entailed local police visually confirming each vehicle has the required number of occupants and chasin
    Read More
  • Frequency changes threaten vehicle safety applications
    January 24, 2012
    The use of frequency spectrum at 5.9GHz for vehicle safety applications is at risk because of two draft bills currently before Congress. Here, we look at why and what’s being done to address the issue. In the US, the right of cooperative infrastructure to use frequency at 5.9GHz is under threat as a result of the proposal of two bills in Congress. The chronology of spectrum allocation for Dedicated Short- Range Communications (DSRC)-based Vehicle-to-Infrastructure (V2I) and Vehicle-to-Vehicle (V2V) safety a
    Read More
  • Haenni shows lightweight solution for low-speed WIM
    March 21, 2018
    The WL400 is a new portable low-speed weigh-in-motion (WIM) wheel load strip sensor which is making its first appearance at Haenni’s stand in hall 10. Designed for pre-selection of vehicles, the 80mm wide sensor has an accuracy of ±2% (excluding external factors) at speeds of up to 20km/h and a capacity of 30tonnes per axle.
    Read More

Highlighted Content