Kistler WIM innovation wins accreditation

A major weigh-in-motion (WIM) innovation being featured here at the ITS World Congress by Kistler has already won accreditation from the International Organisation of Metrology (OIML). To address the ever increasing problem of road surface damage caused by heavy transport, WIM systems employing Kistler quartz sensors have been delivering valuable traffic data for many years. There is also a long tradition in using WIM for preselection of overloaded vehicles.
October 7, 2015 Read time: 2 mins
Tomáš Pospíšek of Kistler

A major weigh-in-motion (WIM) innovation being featured here at the ITS World Congress by 657 Kistler has already won accreditation from the International Organisation of Metrology (OIML).

To address the ever increasing problem of road surface damage caused by heavy transport, WIM systems employing Kistler quartz sensors have been delivering valuable traffic data for many years. There is also a long tradition in using WIM for preselection of overloaded vehicles.

However, Kistler says the chain has been missing the last link that would allow road authorities to implement automatic enforcement based on vehicle weight data or to introduce toll-by-weight models in a free-flow environment. This growing demand for certified WIM systems compliant with international standards has been recently met by Kistler’s OIML-certified WIM technology.

The company is the first WIM manufacturer to have received the International Organisation of Metrology (OIML) R-134 certificate for vehicle weighing with strip sensors. Supported by this certificate, Kistler WIM systems based on maintenance-free Lineas quartz WIM sensors and the Kistler WIM data logger can now be used for legal applications.

In the world of international WIM standards, Kistler says there is a significant difference in the definition of the accuracy classes. While COST323 and ASTM E1318 state that only 95% of WIM measurements need to fulfil the declared accuracy, the OIML requires all (100%) measurements to be in the requested accuracy class.

The Kistler WIM system meets OIML accuracy F5 meaning that for initial verification all errors are below ±2.5 % and during standard operation the system has a measurement error smaller than ±5%.

For more information on companies in this article

Related Content

  • TDS celebrates triple product launch at Intertraffic
    March 24, 2014
    Germany-based Traffic Data Systems (TDS) is launching three ground-breaking products at Intertraffic – the TMCS-U Weigh In Motion system, Bike-DSP, and a world first in testing devices (WIM-SIM). TDS predicts that the TMCS-U with the WIM-DSP unit (Digital Signal Processing, cascadable) will become the new standard for traffic monitoring and Weigh In Motion systems. With a built-in uninterruptible power supply, the company says the device is the world’s most powerful and smallest eight-lane route station to
    Read More
  • Kistler weighs in with KiTraffic plus
    October 12, 2021
    Heavy traffic can seriously strain infrastructure and compromise road safety, but measurement technology expert Kistler has created a comprehensive solution. The company is showcasing its modular KiTraffic Plus system that reliably detects overloaded trucks, flat tyres and registers vehicle dimensions - all without hindering traffic flow. Appropriate measures can then be enforced to safeguard roads
    Read More
  • Traffic Data Systems sets the standard
    April 16, 2024
    With various new loop-based traffic monitoring and classification systems, Traffic Data Systems (TDS) from Germany is once again setting new standards in this business field. All systems have been certified by the German Federal Highway Research Institute (BASt) with the highest achievable accuracy level (A1) and for up to 1,050m loop feed cable (twisted pair AWG20/0,5mm²).
    Read More
  • Traffic Data Systems continues to lead
    September 17, 2024
    Germany-headquartered Traffic Data Systems continues to push boundaries in traffic monitoring and classification with its latest loop-based systems. Certified by the German Federal Highway Research Institute (BASt) at the highest accuracy level (A1), these systems support loop feed cables of up to 1,050 metres using twisted pair AWG20/0.5mm² cables.
    Read More

Highlighted Content