Skip to main content

Final 2012/2013 AERIS webinar

The fifth and final webinar of the AERIS Fall//Winter 2012-2013 Webinar Series will take place on Wednesday, March 13, 2013 at 1:00 pm EST. The webinar will describe the results of a recent connected vehicle field experiment performed in two locations (University of California at Riverside and the Turner Fairbank Highway Research Center). Complementary modelling results will also be described. The field experiment was conducted in August 2012 and was based on the AERIS Program's Eco-Approach and Departure a
March 1, 2013 Read time: 2 mins
The fifth and final webinar of the AERIS Fall//Winter 2012-2013 Webinar Series will take place on Wednesday, March 13, 2013 at 1:00 pm EST.

The webinar will describe the results of a recent connected vehicle field experiment performed in two locations (University of California at Riverside and the Turner Fairbank Highway Research Center). Complementary modelling results will also be described.
 
The field experiment was conducted in August 2012 and was based on the AERIS Program's Eco-Approach and Departure at Signalised Intersections application. The field experiment included a roadside equipment (RSE) unit installed at a traffic signal broadcasting signal phase and timing (SPaT) messages using 5.9 GHz dedicated short range communication (DSRC). SPaT messages were received by the in-vehicle application and uses to provide speed recommendations to the driver that encourage green approaches to signalised intersections. Green approaches include speed recommendations that when applied allow the vehicle to traverse the signalized intersection on green or decelerating to a stop in the most environmentally efficient manner. Results were measured in terms of fuel savings and carbon-dioxide (CO2) emissions reductions.

Dr Matthew Barth, the Director of the University of California, Riverside's Center for Environmental Research and Technology (CE-CERT), who conducted the study, will lead the webinar.  In addition, Dr Barth will discuss initial modeling efforts being conducted by the AERIS Program as they relate to Eco-Signal Operations.

Related Content

  • Taking the long term view to toll safety, adopting new technology
    July 17, 2012
    OmniAir's Tim McGuckin takes a look at what happens when a tolling authority makes safety its principal operating criterion. The bottom - line effects, he says, are not as onerous as one might think. Replacing an existing 915MHz-based Electronic Toll Collection (ETC) system with a new 915MHz system for toll collection is - from a technology standpoint - comparable to trading in your 1999 high-mileage Buick for another 1999 Buick with '0' on the odometer.
  • EDI launches new MMU2 SmartMonitor series
    December 12, 2012
    Recently launched by Eberle Design (EDI) the MMU2-16LEip and MMU2-16LE SmartMonitors fully comply with the recently updated NEMA TS2-2003 (R2008) Standard for Traffic Controller Assemblies, Amendment No. 4-2012. This new standards update defines Flashing Yellow Arrow (FYA) operation for both the controller unit and the MMU. EDI says it is also very proud to be the first MMU manufacturer to be fully conformant to the new NEMA standard and MUTCD requirements. The new SmartMonitor series is designed to monitor
  • Connected offers free I2V connectivity
    November 1, 2016
    A new system could reduce the cost of implementing I2V communications across a city to less than that for a single intersection, as Colin Sowman hears. It may seem too good to be true but US company Connected Signals is offering city authorities the equipment to provide infrastructure to vehicle (I2V) communications for free. The system enables drivers to receive information about the timing of signals they are approaching via the EnLighten smartphone app (or connected in-vehicle display).
  • JPO: to host webinar on Wyoming Connected data accessibility
    January 8, 2018
    Ariel Gold, the ITS Joint Program Office's data program manager will host a webinar on the 25 January 2018 to discuss the preliminary data from the Wyoming Pilot site available for free via the ITS Public Data Hub. The improved accessibility of the data aims to encourage the transportation industry to discover new and innovative ways to make roadways safer and more efficient. These data sets include Basic Safety Messages (BSMs) and Traveller Information Messages. It is being generated before the full