Skip to main content

Fast moving walkways could move 7,000 people per hour

Researchers at the Swiss Federal Institute of Technology in Lausanne (EPFL) researchers have been studying futuristic transport solutions for car-free urban centres and have come up with an optimal design for a network of accelerating moving walkways. This is not a new concept – the first moving walkways were seen in Chicago in 1893 and seven years later they were used at the world’s fair in Paris. They are also regularly used the world over in airports and transport terminals. As part of the PostCarW
November 28, 2016 Read time: 3 mins
Researchers at the Swiss Federal Institute of Technology in Lausanne (EPFL) researchers have been studying futuristic transport solutions for car-free urban centres and have come up with an optimal design for a network of accelerating moving walkways.

This is not a new concept – the first moving walkways were seen in Chicago in 1893 and seven years later they were used at the world’s fair in Paris. They are also regularly used the world over in airports and transport terminals.

As part of the PostCarWorld initiative, which aims to explore the future of mobility both through the role of the car and without cars, EPFL researchers have analysed the feasibility of fast moving walkways in an urban setting, with encouraging results.

The team’s task consisted of imagining a world or a city without private cars in which space designed for automobile use could be repurposed. Individual transport needs would be met by a combination of conventional methods such as buses, metros, trams, taxis, bikes, etc., or by more innovative methods like bike- or car-sharing or urban cable cars. The EPFL’s Transport and Mobility Laboratory studied accelerating moving walkways, which can travel up to 15 km/h, the average speed at which people travel through most large cities during rush hour, to see if they could compete with other means of transport.

The researchers used real data from Geneva in developing their mathematical model, exploring various configurations of speed, acceleration, length and width, as well as intersections and entry and exit points.

They focused on the feasibility of a network of moving walkways and attempted to come up with the optimal design, taking into account the road network, demand, the speed required to make the system competitive, energy consumption and operational and budgetary constraints.

Their ideal network begins with a small ring around a car-free urban centre and extends out along primary roads on 47 different links equipped with 10 gates for a total length of 32 kilometres. There are 37 intersections where expressways would be set up using bridges or underpasses. A walkway can handle 7,000 passengers per hour, while a roadway can accommodate between 750 and 1,800 vehicles.

According to the report authors, electric moving walkways represent a sustainable and eco-friendly transport system and their operating cost is similar to that of buses. “The main downside is the cost of construction. It will cost about as much to install one line as to build a new tram line,” says lead author Riccardo Scarinci. “But the cost could drop if the system were installed on a large scale. That’s why a network of walkways only makes sense in dense and highly congested cities.”

Michel Bierlaire, the director of the Transport and Mobility Laboratory, commented, “This study proves that the concept is credible and that a car-less, pedestrian-centric city is conceivable. This is a useful starting point for urban planners to evaluate the feasibility of accelerating moving walkways.”

Related Content

  • Florida’s Altamonte Springs uses Uber pilot program with Uber to expand transportation coverage
    April 5, 2017
    To Uber or Not to Uber, that is the question cities must answer as they consider the pros and cons of inviting private transportation service providers to fill transportation gaps. Back in 1999, Frank Martz, city manager of Altamonte Springs, Florida, had an idea to expand transportation services to areas not covered by the local bus company.
  • Real time traffic control aids travel time reduction
    January 11, 2013
    An IBEC working group session at ITS World Congress in Vienna in October was presented with an example of a very cost-effective means for reducing traffic travel time. There is no doubt that adaptive real-time traffic control is a very cost-effective ITS application”, Dr Ronald van Katwijk told an IBEC (International Benefits, Evaluation & Costs) working group session at the 2012 ITS World Congress in Vienna. The senior consultant with Netherlands consultant TNO and TrafficQuest, the Dutch Centre for Expert
  • Reducing transport energy use with real time travel information
    January 23, 2012
    The In-Time project is looking at the effect that multi-modal real-time traveller information services can have of reducing transport's energy consumption levels. By Martin Böhm, AustriaTech GmbH. Around the world, significant research and development effort is currently directed towards reducing energy consumption by addressing those areas where the biggest savings can be expected. European studies have shown that the transport sector has the potential to reduce its energy consumption by up to 26 per cent
  • Tri-nation cooperation on C-ITS Corridor
    June 20, 2016
    In the European C-ITS Corridor project, authorities from three countries are working with the automotive industry on the deployment of Cooperative (V2X) Systems. Cooperative Intelligent Transport Systems/Services (C-ITS) has the potential to improve road safety, transport efficiency and environmentally friendly mobility, as well as creating additional services and new business models. A set of international standards have been developed to provide the technical basis for the deployment of Cooperative ITS.