Skip to main content

Fast moving walkways could move 7,000 people per hour

Researchers at the Swiss Federal Institute of Technology in Lausanne (EPFL) researchers have been studying futuristic transport solutions for car-free urban centres and have come up with an optimal design for a network of accelerating moving walkways. This is not a new concept – the first moving walkways were seen in Chicago in 1893 and seven years later they were used at the world’s fair in Paris. They are also regularly used the world over in airports and transport terminals. As part of the PostCarW
November 28, 2016 Read time: 3 mins
Researchers at the Swiss Federal Institute of Technology in Lausanne (EPFL) researchers have been studying futuristic transport solutions for car-free urban centres and have come up with an optimal design for a network of accelerating moving walkways.

This is not a new concept – the first moving walkways were seen in Chicago in 1893 and seven years later they were used at the world’s fair in Paris. They are also regularly used the world over in airports and transport terminals.

As part of the PostCarWorld initiative, which aims to explore the future of mobility both through the role of the car and without cars, EPFL researchers have analysed the feasibility of fast moving walkways in an urban setting, with encouraging results.

The team’s task consisted of imagining a world or a city without private cars in which space designed for automobile use could be repurposed. Individual transport needs would be met by a combination of conventional methods such as buses, metros, trams, taxis, bikes, etc., or by more innovative methods like bike- or car-sharing or urban cable cars. The EPFL’s Transport and Mobility Laboratory studied accelerating moving walkways, which can travel up to 15 km/h, the average speed at which people travel through most large cities during rush hour, to see if they could compete with other means of transport.

The researchers used real data from Geneva in developing their mathematical model, exploring various configurations of speed, acceleration, length and width, as well as intersections and entry and exit points.

They focused on the feasibility of a network of moving walkways and attempted to come up with the optimal design, taking into account the road network, demand, the speed required to make the system competitive, energy consumption and operational and budgetary constraints.

Their ideal network begins with a small ring around a car-free urban centre and extends out along primary roads on 47 different links equipped with 10 gates for a total length of 32 kilometres. There are 37 intersections where expressways would be set up using bridges or underpasses. A walkway can handle 7,000 passengers per hour, while a roadway can accommodate between 750 and 1,800 vehicles.

According to the report authors, electric moving walkways represent a sustainable and eco-friendly transport system and their operating cost is similar to that of buses. “The main downside is the cost of construction. It will cost about as much to install one line as to build a new tram line,” says lead author Riccardo Scarinci. “But the cost could drop if the system were installed on a large scale. That’s why a network of walkways only makes sense in dense and highly congested cities.”

Michel Bierlaire, the director of the Transport and Mobility Laboratory, commented, “This study proves that the concept is credible and that a car-less, pedestrian-centric city is conceivable. This is a useful starting point for urban planners to evaluate the feasibility of accelerating moving walkways.”

Related Content

  • Smart sensors could end rail chaos of ‘leaves on the line’
    November 17, 2016
    A prototype sensor developed at the University of Birmingham, UK, is could end the annual autumn rail chaos caused by wet leaves on the line. Funded by EPSRC and the Rail Safety and Standards Board, Lee Chapman, Professor of Climate Resilience at the University worked with Alta Innovations, the University’s technology transfer company, to transform the concept into a reality. His new technology, called AutumnSense, uses low-cost sensors to continuously measure the level of moisture on the railway l
  • MaaS transit does Dallas
    October 22, 2018
    What started five years ago as a mobile ticketing app is evolving towards a full MaaS offering for the US city of Dallas, Texas. Colin Sowman finds out why and how. When it was launched in September 2013, GoPass was the first multimodal, multi-agency transit fare payment app in the US. Introduced by the Dallas Area Rapid Transit (Dart), GoPass combines a mobile ticketing app with a trip planning function and it is also accepted by Trinity Railway Express, Trinity Metro and the Denton County Transportation
  • UITP reveals promising growth in public transport modal share
    June 10, 2015
    Back in 2009, the public transport sector set itself a goal: double its market share worldwide by 2025 to make cities more liveable and more productive. Today, in 2015, on the occasion of the biennial UITP World Congress & Exhibition in Milan this week, UITP presented a report to illustrate the urban policies that are moving cities closer to that goal. In a report presented at the plenary session of the World Congress, UITP research points to a general increase in public transport modal share thanks to
  • Success of Kuala Lumpur's dual purpose tunnel
    September 12, 2012
    Malaysia’s capital boasts a unique piece of infrastructure; a combined stormwater and motorway tunnel, the longest multi-purpose tunnel in the world. Kuala Lumpur’s Stormwater Management and Road Tunnel (Smart) was conceived as a project under the Malaysian Federal Government to alleviate the flooding problem in the city centre. Although a booming city and the nerve centre for Malaysia’s economy, KL was built along the flood plains of the Klang River and, since its earliest days has been subjected to floodi