Skip to main content

Continental launches sensor to adjust vehicle height

German manufacturer Continental says its Ultrasonic Height and Pressure Sensor (UHPS) can adjust the height of commercial vehicles electronically to improve the efficiency of urban buses. The company says UHPS allows drivers to control the air springs when lowering one side of the bus at bus stops - rather than having to let the air out from the spring completely. UHPS uses ultrasound to measure the height and pressure in the air spring and sends the value of the electronic control unit, which automatic
August 28, 2018 Read time: 2 mins

German manufacturer 260 Continental says its Ultrasonic Height and Pressure Sensor (UHPS) can adjust the height of commercial vehicles electronically to improve the efficiency of urban buses.

The company says UHPS allows drivers to control the air springs when lowering one side of the bus at bus stops - rather than having to let the air out from the spring completely.

UHPS uses ultrasound to measure the height and pressure in the air spring and sends the value of the electronic control unit, which automatically opens or closes the air spring valves. Drivers can pre-select target values in the control unit before starting their journey depending on whether they are travelling through a city or freeway.

The interaction between the control unit and air spring maintains the appropriate height and is also expected to prevent energy from being lost when the bus is lowered or raised.

Continental has also developed a heat-resistant material to protect the air springs from the extreme temperatures from exhaust systems of the engines and other heat sources.

Going forward, Continental intends to enable the air springs to send signals via the sensor technology in a bid to reduce vehicle downtime and improve road safety.

For more information on companies in this article

Related Content

  • Making the most of Michigan
    January 9, 2018
    Michigan DoT’s Kirk Steudle takes time out from the ITS World Congress in Montreal to talk to Colin Sowman. Thirty years ago, a professional engineer named Kirk Steudle joined Michigan Department of Transportation (MDoT). Today he’s the state transportation director, responsible for more than 16,000km (10,000 miles) of state highways (including 4,000 bridges), some 2,500 employees and a budget of more than $4 billion. We caught up with Steudle during the ITS World Congress in Montreal and asked how he
  • Communications hold key to expanding ITS wireless network expansion
    December 21, 2017
    Wireless transmission of data and control information is making smarter traffic management easier and cheaper to install. It has long been known that connectivity is the key to improving traffic management and many cost-benefit studies prove that investment in new technology can be justified in terms of reduced congestion, shorter travel times, improved safety and air quality. However, many authorities’ cap-ex budgets only cover urgent matters, not improvements, making it difficult, if not impossible to
  • Weigh in motion reduces road wear, increases toll revenue
    January 24, 2012
    IRD, Inc's Terry Bergan discusses future applications of weigh in motion technology. The application in recent years of Weigh In Motion (WIM) at tollgates has been driven by recognition of the fact that there is economic value, which can be levied, attached to Heavy Goods Vehicles (HGVs) which haul laden (and are therefore heavy) rather than empty. As wear and damage to road surfaces increases exponentially with weight, the targeting of HGVs in particular makes sense from both the economic and maintenance p
  • Need for performance standards for road user charging systems
    February 2, 2012
    GNSS-based road use metering systems need performance metrics, as well as ways to test and reliably compare them. Bern Grush and Joaquín Cosmen write about the function of the GNSS Metering Association for Road-use charging (GMAR), recently set up to address this issue