Completely new concept for inflating airbags

Autoliv has announced it has developed a completely new concept for inflating airbags that is more environmentally friendly and more cost efficient than traditional inflator technologies. In addition, it reduces the inflator’s weight by 20 per cent compared to most inflators for the intended application.
March 22, 2012 Read time: 2 mins
4171 Autoliv has announced it has developed a completely new concept for inflating airbags that is more environmentally friendly and more cost efficient than traditional inflator technologies. In addition, it reduces the inflator’s weight by 20 per cent compared to most inflators for the intended application.

The new inflator went into production earlier this year, in a passenger-side airbag for a European manufacturer of premium-brand vehicles. It uses hydrogen and oxygen with inert gas to inflate the airbag, instead of pyro­technic substances. As a result, there are no waste particles at all from the combustion and no effluent gases, not even carbon dioxide. The only side product is regular vapour which, when cooled off, becomes just a few drops of pure water, making the inflator extremely environmentally friendly.

In addition, the mixing of the hydrogen and the oxygen takes place in the textile cushion of the airbag, instead of in a steel vessel as in traditional airbag inflators, which allows for a thinner and lighter steel container and reduces weight and costs.

Autoliv says the weight reduction depends on the original inflator but is approximately 20% compared to most traditional inflators for airbags on the front passenger side. If only a quarter of company’s own needs for such passenger airbag inflators were converted to the new hydrogen/oxygen technology, Autoliv says it would save 1,000 tons of steel every year. Additionally, the vehicles with the new inflator would reduce their fuel consumption by more than eight million litres over the expected life time of the vehicles.

The new APG hydrogen/oxygen inflator will primarily be used in frontal airbags for the front-passenger side where higher gas quantities are required than for other airbags in a vehicle. The next step for this technology is to develop a dual-stage version of the inflator to be able to adjust the gas flow to the severity of the crash and to other parameters. Autoliv says this will be done using two independent ignitors and varying the time lapse a few milliseconds between the ignitions.

For more information on companies in this article

Related Content

  • $25 Billion in US budget savings from switching federal freight shipments to carriers using alternative fuels
    August 3, 2012
    A new report from a Washington, DC, energy policy group urges the federal government to begin allocating its US$150 billion budget for transport services to carriers that fuel their fleets on domestically produced natural gas, electricity, biofuels and other alternatives to diesel and gasoline.
    Read More
  • Driver monitoring systems ‘will use inward-looking camera-based technology’
    November 9, 2015
    New analysis from Frost & Sullivan, Original Equipment Manufacturer (OEM) Strategies for Driver Monitoring Systems in Europe, indicates that, as the loss of driver attention due to fatigue or drowsiness is a common cause of road accidents worldwide, there is a clear need for driver monitoring systems (DMSs) globally. DMSs can analyse driver behaviour or detect patterns tending towards micro-sleep to issue appropriate warnings and help revive the driver’s focus. Several original equipment manufacturers (O
    Read More
  • Honda extends development of alternative energy programmes
    April 13, 2012
    Honda has unveiled further initiatives in the testing and evaluation of its alternative energy development programmes for vehicles, with the opening of a solar hydrogen station on the grounds of its Saitama Prefectural Office in Japan and the development of the FCX Clarity to serve as a mobile electric generator.
    Read More
  • Sony’s vision systems help limit risk in road tunnels
    November 10, 2017
    Sony’s Stephane Clauss looks at the imaging requirements in tunnels. In the event of a fire inside a tunnel, the dispersion of gases and heat is prevented, creating extreme temperatures that have led to many deaths. Following tragic incidents including Mont Blanc, European legislation requires longer tunnels to be fitted with incident and smoke detection systems.
    Read More

Highlighted Content