Completely new concept for inflating airbags

Autoliv has announced it has developed a completely new concept for inflating airbags that is more environmentally friendly and more cost efficient than traditional inflator technologies. In addition, it reduces the inflator’s weight by 20 per cent compared to most inflators for the intended application.
March 22, 2012 Read time: 2 mins
4171 Autoliv has announced it has developed a completely new concept for inflating airbags that is more environmentally friendly and more cost efficient than traditional inflator technologies. In addition, it reduces the inflator’s weight by 20 per cent compared to most inflators for the intended application.

The new inflator went into production earlier this year, in a passenger-side airbag for a European manufacturer of premium-brand vehicles. It uses hydrogen and oxygen with inert gas to inflate the airbag, instead of pyro­technic substances. As a result, there are no waste particles at all from the combustion and no effluent gases, not even carbon dioxide. The only side product is regular vapour which, when cooled off, becomes just a few drops of pure water, making the inflator extremely environmentally friendly.

In addition, the mixing of the hydrogen and the oxygen takes place in the textile cushion of the airbag, instead of in a steel vessel as in traditional airbag inflators, which allows for a thinner and lighter steel container and reduces weight and costs.

Autoliv says the weight reduction depends on the original inflator but is approximately 20% compared to most traditional inflators for airbags on the front passenger side. If only a quarter of company’s own needs for such passenger airbag inflators were converted to the new hydrogen/oxygen technology, Autoliv says it would save 1,000 tons of steel every year. Additionally, the vehicles with the new inflator would reduce their fuel consumption by more than eight million litres over the expected life time of the vehicles.

The new APG hydrogen/oxygen inflator will primarily be used in frontal airbags for the front-passenger side where higher gas quantities are required than for other airbags in a vehicle. The next step for this technology is to develop a dual-stage version of the inflator to be able to adjust the gas flow to the severity of the crash and to other parameters. Autoliv says this will be done using two independent ignitors and varying the time lapse a few milliseconds between the ignitions.

For more information on companies in this article

Related Content

  • New model generation with PTV’s Model2Go
    August 8, 2022
    PTV Group has launched a product which automates much of the painstaking business of building transport models. Adam Hill talks to the company’s Udo Heidl and Ben Stabler to find out more
    Read More
  • Bogota launches all-electric taxi fleet
    September 3, 2013
    As part of Columbia’s new Biotaxis project, forty-five all-electric BYD e6 taxies have been put into service in the country’s capital, Bogota. The BYD e6 is a five-passenger, long-range, pure electric utility vehicle powered by an iron-phosphate battery. It is a crossover between a sedan and an SUV with a large interior space and additional 450 litre cargo space. The nominal range of e6 from a single charge is 300 kilometres. Using BYD’s internally-developed bi-directional charging and discharging techno
    Read More
  • Flir takeover of Traficon and the role of thermal imaging
    February 28, 2013
    Andy Teich, president of commercial systems at Flir, discusses the growing role of thermal technology in ITS and his company’s latest high-profile acquisition with Jason Barnes. Andy Teich, Flir’s president of commercial systems, doesn’t want to talk about infrared (IR). Instead, he’d prefer, he says, to discuss ‘thermal technology’. It is, he explains, to differentiate between the imaging technologies which his company specialises in and the LED illumination of IR cameras, an altogether different beast. Fl
    Read More
  • Road user charging - replacing the gas tax with a mileage based fee
    January 19, 2012
    Oregon Department of Transportation's James Whitty discusses his state's progress with VMT fee-based charging. Back in 2001, the state of Oregon stole a lead on the rest of the US when it decided to address the need to do something about the gas tax and its decreasing ability to fund highway construction and upkeep. Recognising that a dwindling pot of money could only shrink further as vehicles became more fuelefficient, Oregon's Legislative Assembly passed laws which led to the setting up, by the state's g
    Read More

Highlighted Content