Completely new concept for inflating airbags

Autoliv has announced it has developed a completely new concept for inflating airbags that is more environmentally friendly and more cost efficient than traditional inflator technologies. In addition, it reduces the inflator’s weight by 20 per cent compared to most inflators for the intended application.
March 22, 2012 Read time: 2 mins
4171 Autoliv has announced it has developed a completely new concept for inflating airbags that is more environmentally friendly and more cost efficient than traditional inflator technologies. In addition, it reduces the inflator’s weight by 20 per cent compared to most inflators for the intended application.

The new inflator went into production earlier this year, in a passenger-side airbag for a European manufacturer of premium-brand vehicles. It uses hydrogen and oxygen with inert gas to inflate the airbag, instead of pyro­technic substances. As a result, there are no waste particles at all from the combustion and no effluent gases, not even carbon dioxide. The only side product is regular vapour which, when cooled off, becomes just a few drops of pure water, making the inflator extremely environmentally friendly.

In addition, the mixing of the hydrogen and the oxygen takes place in the textile cushion of the airbag, instead of in a steel vessel as in traditional airbag inflators, which allows for a thinner and lighter steel container and reduces weight and costs.

Autoliv says the weight reduction depends on the original inflator but is approximately 20% compared to most traditional inflators for airbags on the front passenger side. If only a quarter of company’s own needs for such passenger airbag inflators were converted to the new hydrogen/oxygen technology, Autoliv says it would save 1,000 tons of steel every year. Additionally, the vehicles with the new inflator would reduce their fuel consumption by more than eight million litres over the expected life time of the vehicles.

The new APG hydrogen/oxygen inflator will primarily be used in frontal airbags for the front-passenger side where higher gas quantities are required than for other airbags in a vehicle. The next step for this technology is to develop a dual-stage version of the inflator to be able to adjust the gas flow to the severity of the crash and to other parameters. Autoliv says this will be done using two independent ignitors and varying the time lapse a few milliseconds between the ignitions.

For more information on companies in this article

Related Content

  • Hylium Industries unveils hydrogen refuelling station
    July 10, 2018
    South Korea-based technology company Hylium Industries says its mobile liquid hydrogen station can refuel up to 100 fuel cell electric vehicles per day. Hylium says the station will contribute to the expansion of liquid hydrogen supply infrastructure for hydrogen-powered cars worldwide. The mobile station is a five-tonne truck which can store up to 7,500 litres of low-pressure liquid hydrogen and carries fuelling equipment such a vaporiser and dispenser. In addition, the 900bar liquid pump is intended
    Read More
  • Amsterdam’s municipal fleet ‘zero-emission by 2025’
    October 16, 2019
    Amsterdam’s authorities have announced that most municipality vehicles must be zero-emission by 2025 - followed by all other vehicles in the city 2030. The Dutch city says the municipality owns around 1,500 vehicles, which account for around 4% of all road traffic emissions in Amsterdam. As part of the plan, the city will aim to convert all its cars and small cars and delivery vans to zero-emission as early as 2022. Street-sweeping and cleaning trucks and other medium-sized vehicles will follow in 202
    Read More
  • Next-generation fuel cells ready for low-emission electricity production
    November 25, 2015
    The VTT Technical Research Centre of Finland, under the INNO-SOFC project and in collaboration with Convion and Elcogen, is developing a new-generation, long-life fuel cell system offering efficiency higher than that of competing technologies. The project aims to develop new, energy-efficient and commercially viable applications.
    Read More
  • Weigh in Motion gets smarter
    January 4, 2023
    Weigh in Motion technology is at the forefront of protecting road surfaces and helping enforcement activity – but could it also play a key role in the development of Smart Cities?
    Read More

Highlighted Content