Completely new concept for inflating airbags

Autoliv has announced it has developed a completely new concept for inflating airbags that is more environmentally friendly and more cost efficient than traditional inflator technologies. In addition, it reduces the inflator’s weight by 20 per cent compared to most inflators for the intended application.
March 22, 2012 Read time: 2 mins
4171 Autoliv has announced it has developed a completely new concept for inflating airbags that is more environmentally friendly and more cost efficient than traditional inflator technologies. In addition, it reduces the inflator’s weight by 20 per cent compared to most inflators for the intended application.

The new inflator went into production earlier this year, in a passenger-side airbag for a European manufacturer of premium-brand vehicles. It uses hydrogen and oxygen with inert gas to inflate the airbag, instead of pyro­technic substances. As a result, there are no waste particles at all from the combustion and no effluent gases, not even carbon dioxide. The only side product is regular vapour which, when cooled off, becomes just a few drops of pure water, making the inflator extremely environmentally friendly.

In addition, the mixing of the hydrogen and the oxygen takes place in the textile cushion of the airbag, instead of in a steel vessel as in traditional airbag inflators, which allows for a thinner and lighter steel container and reduces weight and costs.

Autoliv says the weight reduction depends on the original inflator but is approximately 20% compared to most traditional inflators for airbags on the front passenger side. If only a quarter of company’s own needs for such passenger airbag inflators were converted to the new hydrogen/oxygen technology, Autoliv says it would save 1,000 tons of steel every year. Additionally, the vehicles with the new inflator would reduce their fuel consumption by more than eight million litres over the expected life time of the vehicles.

The new APG hydrogen/oxygen inflator will primarily be used in frontal airbags for the front-passenger side where higher gas quantities are required than for other airbags in a vehicle. The next step for this technology is to develop a dual-stage version of the inflator to be able to adjust the gas flow to the severity of the crash and to other parameters. Autoliv says this will be done using two independent ignitors and varying the time lapse a few milliseconds between the ignitions.

For more information on companies in this article

Related Content

  • The smart in smart parking
    March 29, 2018
    Whether you want to reduce congestion, increase parking revenue or reduce occupancy – or a mixture of all three – there is plenty of technology available. Andrew Bardin Williams considers the pros and cons. Drawn in by the promise of Smart City initiatives, communities across North America are embracing smart parking solutions in an effort to change citizens’ transportation behaviours for the better. They are doing this by using policy and ITS solutions to help de-incentivise parking for most people while
    Read More
  • A carbon free and accident free Europe by 2015?
    February 2, 2012
    By 2050, the Europe Commission aims to make transport in Europe carbon- and accident-free. Between now and then, however, a significant technological development and deployment effort is needed. Here, Neelie Kroes, European Commission Vice-President for the Digital Agenda, talks about what's being done. In many respects, COOPERS, CVIS and SAFESPOT, set up by the European Commission (EC) to explore the potential of cooperative infrastructure systems, are already legacy projects. Between them, the three devel
    Read More
  • GE researchers developing at-home refuelling station for NG vehicles
    July 20, 2012
    In what could help fuel widespread adoption of natural gas-powered (NG) vehicles in the US and globally, GE researchers, in partnership with Chart Industries and scientists at the University of Missouri, have been awarded a programme through Advanced Research Projects Agency for Energy (ARPA-E) to develop an affordable at-home refuelling station that would meet ARPA-E’s target of $500 per station and reduce re-fuelling times from 5-8 hours to less than 1 hour. Natural gas prices are at an all-time low and t
    Read More
  • Orafol’s Oralite RTR 3200i offers cost savings for customers
    March 21, 2018
    Orafol is showing off its latest-generation UV LED dual-roll permanent traffic sign printer for the first time at Intertraffic. The Oralite RTR 3200i LED printer has an increased production speed and offers a 30% increase in productivity over the existing model, says Orafol’s John Crotty, with lower power consumption a particular attraction to customers. “Everyone’s moving to LED,” he continues. “It is simpler to operate with fewer mechanical parts, lamps are instantly on/off, there is no warm up/cool down
    Read More

Highlighted Content