Skip to main content

Clearview Traffic shortlisted for two Highways Excellence Awards

Clearview Traffic Group has been shortlisted in two different categories for the Highways Magazine Excellence Awards 2012, with two diverse road delineation projects. In the Road Marking Project of the Year category, the company has been chosen as a finalist for its dynamic delineation project for the Hindhead Tunnel in Surrey, UK, where Clearview installed 868 Astucia IRS2 hardwired bi-directional road studs in a project initiated by the Highways Agency (HA) in 2007 to remove a major source of congestion a
September 28, 2012 Read time: 2 mins
557 Clearview Traffic Group has been shortlisted in two different categories for the Highways Magazine Excellence Awards 2012, with two diverse road delineation projects.

In the Road Marking Project of the Year category, the company has been chosen as a finalist for its dynamic delineation project for the Hindhead Tunnel in Surrey, UK, where Clearview installed 868 Astucia IRS2 hardwired bi-directional road studs in a project initiated by the 503 Highways Agency (HA) in 2007 to remove a major source of congestion around the A3/A287 junction.

According to Clearview, the hardwired road studs not only provide superior lane delineation with all the safety benefits, but also facilitate dynamic lane marking, allowing for normal running through each bore or a contraflow situation when one bore is closed.  Under normal running every other stud, therefore every 9m, is illuminated facing the oncoming traffic, whilst during contra flow arrangements every stud is illuminated in each direction at 4.5m intervals as a ‘do not cross’  instruction. This has given the operators the flexibility they require to maximise the safe and smooth continuous flow on this critical arterial road under all operating conditions.

The company has also been shortlisted jointly with Jacobs and Telford & Wrekin Council in the Road Safety Scheme or Project of the Year, for the A41 Chetwynd road safety scheme, which aims to decrease the number of collisions and reduce speeding drivers on this hazardous section of road.

The scheme runs along a dangerous stretch of the A41 in Chetwynd and is said to be a first in the UK, using both 1875 Astucia SolarLite and IRS1 hardwired intelligent road studs together with vehicle activated signs (VAS). During the hours of darkness the junction layout is defined using the road studs, delineating the road layout and shape also highlighting the turning lanes. Approaching vehicles travelling in excess of a predetermined trigger speed illuminate the VAS and the road studs increase in brightness to further highlight the junction layout and promote speed reduction.

The awards will be announced in London at a special awards dinner on Thursday 11th October 2012.

Related Content

  • August 12, 2013
    Nationwide drive to promote UK cycling
    UK Prime Minister David Cameron has announced a US$119 million injection of cash for the country, along with plans to make roads safer for those on two wheels. US$119 million will be divided between Manchester, Leeds, Birmingham, Newcastle, Bristol, Cambridge, Oxford and Norwich, while the New Forest, Peak District, South Downs and Dartmoor will each share a slice of US$26 million funding for national parks. With local contributions, the total new funding for cycling is US£229 million between now and 2015.
  • February 24, 2016
    Study shows curve warning systems ‘reduce crashes’
    A study by the US Federal Highway Administration’s Highways for Life has found a small but consistent reductions in mean and 85 percentile speeds on dangerous bends through the use of Tapco’s BlinkerChevron dynamic curve warning and guidance system (DCWGS) instead of static warning signs. The system's detects oncoming vehicles up to 90m (300ft) from the curve and will trigger the flashing LEDs on the signs if the vehicle’s speed exceed a predetermined level to warn the driver of the dangerous curves with e
  • September 20, 2012
    Developing integrated transport networks
    A major initiative in managing numerous transport networks as a single system has moved into a significant phase with design of sophisticated new ITS systems. Jon Masters reports. Detailed design work is under way on two pilot projects pursuing a common principle – that transportation can be made more efficient or effective if the various networks and modes of travel are managed as a whole system. This is the central tenet of the US Department of Transportation’s (USDOT) Integrated Corridor Management (ICM)
  • May 19, 2014
    Intelligent crossing points leads to safer future for pedestrians
    An innovative project at a busy UK retail park could provide the blueprint for a new approach to pedestrian safety, according to its developers. The system utilised hard-wired active flashing LED road studs from Rennicks UK to delineate the crossing, in conjunction with LED warning signs from Swarco. Pole-mounted C-Walk pedestrian detectors from Flir activate the high performance LED studs to create a striking visual warning for motorists approaching an internal crossing at Giltbrook, near Nottingham.