Skip to main content

CityMobil2 selects first seven sites

The European project CityMobil2 has selected the first round of sites to run demonstrations and showcases of automated road transport systems, which are made up of vehicles operating without a driver in collective mode, under the control of a fleet and infrastructure supervision system.
May 7, 2014 Read time: 3 mins
The European project 7758 CityMobil2 has selected the first round of sites to run demonstrations and showcases of automated road transport systems, which are made up of vehicles operating without a driver in collective mode, under the control of a fleet and infrastructure supervision system.
 
The French coastal town of La Rochelle will kick off the first large-scale demo in autumn 2014, which will run for around six months. The 2015 World Exhibition in Milan will be the site of the second large-scale demonstration from May until November 2015. The EPFL campus in the West Lausanne region will host the third large-scale demonstration at a date still to be determined.
 
The Italian town of Oristano in Sardinia will host the first small-scale demonstrator this July and August, followed by a one-month demonstration in the city of Vantaa, Finland, in the summer of 2015.
 
Two showcases, involving a demonstration of automated transport over a period of several days with the aim of raising local awareness of these systems and wider mobility challenges, will start in September 2014 in Leon, Spain, followed by the CERN campus on the French-Swiss border near Geneva.
 
More sites will be progressively selected to host a CityMobil2 demonstration in 2016. Between seven and nine demonstrations are expected to be take place during the project. In total, some 12 towns and cities (or equivalent) carried out feasibility studies and were candidates for a demonstration. All recognise the potential of vehicle automation to improve their passenger transport service.
 
French company 7759 Robosoft, a specialist in robotic technologies across different sectors, will supply a fleet of automated vehicles and supporting systems. The vehicles are conventional electric minibuses that Robosoft is converting to make them fully automated. Each vehicle can carry twelve people, or ten with a wheelchair, and the combined capacity of the vehicle fleet should be around sixty. The maximum speed of the vehicle is 45 km/h; however, this will be adjusted to the specific conditions of each demonstration site. A second fleet of vehicles is in the process of being selected.
 
Several automated transport schemes are in operation around the world, including Group Rapid Transit at Rivium Park Shuttle in the Netherlands, Morgantown in the US, and Personal Rapid Transit at Heathrow airport, UK and in Masdar, UAE. All these systems use exclusive and physically protected infrastructures.

To encourage a wider take-up of automated transport systems within urban areas, CityMobil2 aims at deploying them while progressively removing the physical barriers around them. This follows previous studies showing that transport systems based on automation have significant potential in areas of low to medium demand and/or as a feeder service to the main public transport network. Their costs are comparable to conventional public transport yet they can offer a high-frequency, on demand collective 'taxi-like' service.
 
The CityMobil2 project is tackling other hurdles to the deployment of automated transport systems, including the legal barriers. Currently, various international conventions and national road and vehicle regulations include references to the driver, and his/her duties and liabilities. CityMobil2 is exploring the prospects for a harmonisation of the legal framework at EU level and developing a validation and certification framework for the deployment of fully automated vehicles in public roads.

For more information on companies in this article

Related Content

  • Van Pool requests 40 Ballad fuel-cell engines for buses in Germany
    March 6, 2018
    Ballad Power Systems (Ballad) has received a letter of intent from original equipment manufacturer partner Van Hool, for 40 FCveloCity-HD 85-kilowatt fuel cell engines to power buses in Germany under the first Joint Initiative For Hydrogen Vehicles Across Europe (JIVE) program. These projects aim to commercialise fuel cell electric buses, reduce costs and support the development of hydrogen refuelling stations. Van Hool plans to deploy 30 of these buses with the Regionalverkehr Köln transit agency in
  • TRW demonstrates semi-automated driving features
    September 16, 2014
    TRW Automotive Holdings is to demonstrate is semi-automated driving capabilities at the Company's vehicle test track event in Locke Township, Michigan, today. Drivers will be able to experience a 'highway driving assist' feature which can enable automatic steering, braking and acceleration for highway speeds above 25 mph. The demonstration vehicle integrates TRW's AC1000 radar and next generation camera prototype together with its electrically powered steering belt drive (EPS BD) and electronic stability
  • NOCoE delivers data for diligent DOTs
    April 29, 2015
    David Crawford talks to Dennis Motiani about the role of the new National Operations Centre of Excellence. Consolidating the collective experience of the US transportation system’s management and operations (TSM&O) community, streamlining its information gathering, while cutting research times and costs are the key drivers behind the country’s new National Operations Centre of Excellence (NOCoE). Launched in January at the annual meeting of the Transportation Research Board (TRB), this sets out to be a sin
  • Connected cones make for safer sites
    May 31, 2013
    David Crawford welcomes new lives for old road safety products. Traffic cones and barrels have traditionally been on the bottom shelf of the road construction and maintenance industry, typically forming visible soft safety barriers for temporary works at a lower cost than concrete alternatives. On both sides of the Atlantic, however, they are fast gaining new roles as instrumented components in advanced construction safety arrays. The EC-sponsored €1 million (US$1.31 million) Safelane collaborative innovati