Skip to main content

Bombardier's battery powered tram completes test

Rail technology company Bombardier Transportation has successfully completed a 41.6 km catenary-free test run using a Bombardier-built tram, powered entirely by its Primove battery in combination with Bombardier Mitrac. The test run was conducted in the German city of Mannheim on the Rhein-Neckar-Verkehr (RNV) network. RNV began using SuperCaps energy storage systems in 2009 and has integrated this technology into 30 of their trams. This provided sufficient energy for short CFO distances. However, the l
November 5, 2015 Read time: 2 mins
Rail technology company 513 Bombardier Transportation has successfully completed a 41.6 km catenary-free test run using a Bombardier-built tram, powered entirely by its Primove battery in combination with Bombardier Mitrac. The test run was conducted in the German city of Mannheim on the Rhein-Neckar-Verkehr (RNV) network.

RNV began using SuperCaps energy storage systems in 2009 and has integrated this technology into 30 of their trams. This provided sufficient energy for short CFO distances. However, the latest generation of Bombardier's Primove battery system has been specifically developed for use with CFO where greater distances need to be covered.

The Primove battery and Mitrac propulsion equipment combination has been in successful revenue service on the Hexi line in Nanjing, China since August 2014. Six trams operate without overhead cables on 90 per cent of the lines. The batteries are charged seamlessly during passenger service via the pantograph, statically at tram stops, and dynamically during acceleration. On this demanding route, the CFO propulsion system has proven its suitability for almost any tram line worldwide.

For more information on companies in this article

Related Content

  • GMV wins Lisbon tram ITS contract
    March 28, 2022
    Deal from Caf covers systems for Urbos 3 streetcars which will begin service next year
  • Need for standardisation of toll classes
    March 2, 2012
    In a previous article Bob Lees of Idris Technology Ltd looked at the appropriateness of toll classes in relation to all-electronic toll fee collection. Here, he looks at how addressing classification standardisation could avoid downstream aggravation and cost
  • Manchester seeks smart but not selective transport solutions
    January 25, 2018
    Smarter transport relies on better communications both with travellers and between transport providers. Andrew Williams reports. Inrix’s prediction that the cost of traffic congestion will rise by 63% to £21bn per year by 2030 clearly illustrates that, in addition to the ongoing inconvenience and inefficiency, ongoing gridlock is a significant drain on the economy. It is against this backdrop that a Cisco-led consortium has launched CitySpire, a smart transport programme that uses location-based services a
  • On a WIM – a global view of weigh in motion
    May 25, 2016
    Q-Free’s Andrew Lees looks at regional characteristics and technology trends in the global Weigh-In-Motion market. The principles of Weigh-In-Motion (WIM) are well established. Data derived from vehicles passing over in-ground sensors can be interpreted for vehicle classification (axle counts and spacing) and positive identification (especially when linked to image capture) applications as well as to derive individual axle and gross vehicle weight (GVW).