Skip to main content

All electric vehicle barrier exceeds cycle testing expectations

"The cycle testing was performed at the Texas Transportation Institute at the Texas A&M University System, in College Station, Texas. The IIID electric barrier successfully completed 1,491,455 cycles, before a replaceable cable failed.
March 23, 2012 Read time: 1 min
RSSNasatka Security has announced that its NMSB IIID steel plate vehicle barrier exceeded the expectations of the US Department of State (DOS) active vehicle barrier cycle test specification, by completing nearly 1.5 million up/down cycles of continuous operation between April and September 2011. Under the specification, the barrier was run non-stop, with no allowance for pausing the test for preventative maintenance or inspections.

The cycle testing was performed at the 232 Texas Transportation Institute at the Texas A&M University System, in College Station, Texas. The IIID electric barrier successfully completed 1,491,455 cycles, before a replaceable cable failed.

“Through the use of linear actuators and better system control accommodated with electric servo drive technology, Nasatka's IIID electric barrier ran uninterrupted for what totals over five years of barrier cycles at a high vehicle volume site," said David Natelson, president of Nasatka Security.

For more information on companies in this article

Related Content

  • Cost-effective alternatives to traditional loops
    February 1, 2012
    Traffic signal control is a mainstay of urban congestion management. Despite advances in vehicle detection sensors, inductive loops, which operate by using a magnetic field to detect the metal components in vehicles, are still the most common enabler for intelligent signalised junctions.
  • Common European language for V2V and V2I communication demonstrated
    July 10, 2012
    A European Commission-sponsored research project took a significant step towards vehicle-to-vehicle (V2V) and vehicle to infrastructure (V2I) when it presented its results at the Dutch DITCM test site in Helmond last week. The event unveiled the Drive C2X reference system, demonstrating for the first time the ability to create a harmonised testing environment across Europe. The research project brings together car manufacturers, research institutes, authorities and information technology providers to provid
  • Measuring alertness to avert drowsy driver incidents
    December 21, 2015
    Falling asleep at the wheel is the primary cause in thousands of deaths on American and other roads, with truck drivers the most at-risk group. David Crawford investigates measures to counter drowsy driving.
  • Network Rail successfully tests new trains using advanced ‘in-cab’ signalling system
    August 5, 2016
    An advanced signalling system that will allow trains to travel every two to three minutes through central London was successfully tested using Govia Thameslink Railway’s new Siemens Class 700 trains for the first time. The Thameslink Programme, part of Network Rail’s Railway Upgrade Plan to provide a bigger, better, more reliable railway for passengers and businesses, achieved another milestone in the early hours of Saturday morning as it successfully ran a Class 700 train through the central London ‘cor