Skip to main content

2getthere’s Group Rapid Transit vehicle passes desert climate test

2getthere’s Group Rapid Tansit (GRT) autonomous vehicle has proven in a simulated desert climate that it can maintain an indoor temperature of 23˚C even in the worst scenario (52˚C outside temperature and 3% humidity). The climate test took place in the Utrecht province and is one of many tests regarding the mega-order received from United Arab Emirates earlier this year. From 2020, five vehicles will perform fully autonomous shuttle services to and from Bluewater Island in Dubai.
October 26, 2017 Read time: 2 mins

8172 2getthere’s Group Rapid Tansit (GRT) autonomous vehicle has proven in a simulated desert climate that it can maintain an indoor temperature of 23˚C even in the worst scenario (52˚C outside temperature and 3% humidity). The climate test took place in the Utrecht province and is one of many tests regarding the mega-order received from United Arab Emirates earlier this year. From 2020, five vehicles will perform fully autonomous shuttle services to and from Bluewater Island in Dubai.

GRT was subject to three tests in weather conditions such as ‘hot dry’ and ‘hot humid’ with a focus on the performance of the air conditioning system (ACS) at the vehicles maximum capacity of 24 passengers.

13 ACS has been developed in collaboration with suppliers DC Airco and Netherlands Aerospace Centre (NLR) who used the simulation of heat management in relation to airflow within the vehicle in its design of the air conditioning. Its development has been partly financed through a 2024 Massachusetts Institute of Technology research grant in which DC Airco and 2getthere have both participated.

The simulated weather conditions included extremely high temperatures and sun radiation with average peaks in the sun radiation of 1,040 Watts per square metre and peaks in temperature of 52˚C around 3.30pm. In the climatic chamber, both peaks were simulated at the same time.

The GRT’s 16 standing passengers represented 120 Watts each and eight seated passengers each represented 100 Watts were simulated by placing a 3000-Watt heat source inside the vehicle. Part of the test focused on performance during transition: the speed at which indoor conditions are brought back to the most comfortable level for passengers after the doors close and the vehicle starts its journey. The most extreme test was based on the vehicle standing still with the doors open for six minutes, but in actual circumstances much shorter stops will be sufficient to allow 24 passengers to enter the vehicle and find their seats.

According to 2getthere the test marks another step towards the operational deployment of the system, scheduled for 2019/2020.

Related Content

  • August 15, 2023
    Dubai AV bus tests underway in $2.3m competition
    World Challenge for Self-Driving Transportation focuses on buses this year
  • June 30, 2020
    Lagos would welcome careful drivers
    An index has revealed the most dangerous parts of the world for car crashes, with cities in Africa, the US, India and Russia particularly challenging – although the rest of us might head to Calgary in Canada.
  • August 13, 2019
    HEAT trials autonomous shuttle in regular traffic in Hamburg
    The HEAT (Hamburg Electric Autonomous Transportation) project is integrating an autonomous shuttle bus into regular traffic in the German city. The electric bus will be available to riders travelling in HafenCity, a district within the borough of Hamburg-Mitte, from mid-2020. Developed by IAV, the minibus should be able to reach speeds of 50km/h while travelling along the 1.8km route. A digital communications system and sensors have been installed along the route to keep the vehicle in communication
  • June 19, 2017
    Millbrook Group announces expansion of year-round testing at Test World
    Millbrook Group has announced an expansion of its Test World tyre testing site in Finland. The project will increase the capacity for testing on natural snow and ice and introduce wet and dry braking, aquaplaning and split friction surfaces.