Skip to main content

2getthere’s Group Rapid Transit vehicle passes desert climate test

2getthere’s Group Rapid Tansit (GRT) autonomous vehicle has proven in a simulated desert climate that it can maintain an indoor temperature of 23˚C even in the worst scenario (52˚C outside temperature and 3% humidity). The climate test took place in the Utrecht province and is one of many tests regarding the mega-order received from United Arab Emirates earlier this year. From 2020, five vehicles will perform fully autonomous shuttle services to and from Bluewater Island in Dubai.
October 26, 2017 Read time: 2 mins

8172 2getthere’s Group Rapid Tansit (GRT) autonomous vehicle has proven in a simulated desert climate that it can maintain an indoor temperature of 23˚C even in the worst scenario (52˚C outside temperature and 3% humidity). The climate test took place in the Utrecht province and is one of many tests regarding the mega-order received from United Arab Emirates earlier this year. From 2020, five vehicles will perform fully autonomous shuttle services to and from Bluewater Island in Dubai.

GRT was subject to three tests in weather conditions such as ‘hot dry’ and ‘hot humid’ with a focus on the performance of the air conditioning system (ACS) at the vehicles maximum capacity of 24 passengers.

13 ACS has been developed in collaboration with suppliers DC Airco and Netherlands Aerospace Centre (NLR) who used the simulation of heat management in relation to airflow within the vehicle in its design of the air conditioning. Its development has been partly financed through a 2024 Massachusetts Institute of Technology research grant in which DC Airco and 2getthere have both participated.

The simulated weather conditions included extremely high temperatures and sun radiation with average peaks in the sun radiation of 1,040 Watts per square metre and peaks in temperature of 52˚C around 3.30pm. In the climatic chamber, both peaks were simulated at the same time.

The GRT’s 16 standing passengers represented 120 Watts each and eight seated passengers each represented 100 Watts were simulated by placing a 3000-Watt heat source inside the vehicle. Part of the test focused on performance during transition: the speed at which indoor conditions are brought back to the most comfortable level for passengers after the doors close and the vehicle starts its journey. The most extreme test was based on the vehicle standing still with the doors open for six minutes, but in actual circumstances much shorter stops will be sufficient to allow 24 passengers to enter the vehicle and find their seats.

According to 2getthere the test marks another step towards the operational deployment of the system, scheduled for 2019/2020.

Related Content

  • June 12, 2015
    New range of PTZ cameras from Videotec
    Videotec’s new range of pan-tilt-zoon (PTZ) cameras, Ulisse Radical integrates full HD cameras, ½-inch CMOS sensor, and 1080p/60fps for daytime and night-time broadcast quality video and is suitable for surveillance of large outdoor areas, perimeters, border lines, harbors and airports, control of highways and military installations. High-performance lenses, 18x or 33x, up to 500mm, equipped with an advanced autofocus allow the user to quickly achieve and maintain automatic focus on a very distant subject,
  • March 29, 2022
    Team Segnal makes its mark
    The highest eco-sustainability together with high performance and an unrivalled versatility - this is Aquaerapid, Petraplast 3k and Luxspray 2k.
  • January 26, 2017
    Hyperloop Transportation Technologies opens in Toulouse Aerospace Valley
    US transportation company Hyperloop Transportation Technologies (HTT) has agreed with the city of Toulouse, France to open a facility for the development and testing of Hyperloop-related technologies. As part of this agreement, the city, known Aerospace Valley, is providing a 3,000 square metre facility along with outdoor terrain. The agreement will enable HTT and local government to tap regional aerospace talent pool for continuous development and improvement of Hyperloop technology in Toulouse, France
  • May 22, 2018
    Teleste’s on-board solution to be used in Merseytravel metro trains
    Finnish technology company Teleste’s on-board solution will be utilised on rail group Stadler's Merseytravel Metro trains, due to be delivered to Liverpool by 2020. The device will be installed on 52 vehicles to help improve safety for passengers. Teleste’s system comprises Ethernet network, intercommunication and passenger counting, public address system, passenger information system and high-quality LED and side-by-side thin-film transistor LCD displays for information delivery and advertising.