Skip to main content

2getthere’s Group Rapid Transit vehicle passes desert climate test

2getthere’s Group Rapid Tansit (GRT) autonomous vehicle has proven in a simulated desert climate that it can maintain an indoor temperature of 23˚C even in the worst scenario (52˚C outside temperature and 3% humidity). The climate test took place in the Utrecht province and is one of many tests regarding the mega-order received from United Arab Emirates earlier this year. From 2020, five vehicles will perform fully autonomous shuttle services to and from Bluewater Island in Dubai.
October 26, 2017 Read time: 2 mins

8172 2getthere’s Group Rapid Tansit (GRT) autonomous vehicle has proven in a simulated desert climate that it can maintain an indoor temperature of 23˚C even in the worst scenario (52˚C outside temperature and 3% humidity). The climate test took place in the Utrecht province and is one of many tests regarding the mega-order received from United Arab Emirates earlier this year. From 2020, five vehicles will perform fully autonomous shuttle services to and from Bluewater Island in Dubai.

GRT was subject to three tests in weather conditions such as ‘hot dry’ and ‘hot humid’ with a focus on the performance of the air conditioning system (ACS) at the vehicles maximum capacity of 24 passengers.

13 ACS has been developed in collaboration with suppliers DC Airco and Netherlands Aerospace Centre (NLR) who used the simulation of heat management in relation to airflow within the vehicle in its design of the air conditioning. Its development has been partly financed through a 2024 Massachusetts Institute of Technology research grant in which DC Airco and 2getthere have both participated.

The simulated weather conditions included extremely high temperatures and sun radiation with average peaks in the sun radiation of 1,040 Watts per square metre and peaks in temperature of 52˚C around 3.30pm. In the climatic chamber, both peaks were simulated at the same time.

The GRT’s 16 standing passengers represented 120 Watts each and eight seated passengers each represented 100 Watts were simulated by placing a 3000-Watt heat source inside the vehicle. Part of the test focused on performance during transition: the speed at which indoor conditions are brought back to the most comfortable level for passengers after the doors close and the vehicle starts its journey. The most extreme test was based on the vehicle standing still with the doors open for six minutes, but in actual circumstances much shorter stops will be sufficient to allow 24 passengers to enter the vehicle and find their seats.

According to 2getthere the test marks another step towards the operational deployment of the system, scheduled for 2019/2020.

Related Content

  • July 31, 2014
    News Test
    News Test
  • May 9, 2024
    Tattile has eyes on Buenos Aires
    Tattile has provided its high-performance free-flow ANPR system consisting of Vega Smart 2HD camera and Axle Counter cameras - powered by artificial intelligence - to the capital of Argentina. David Arminas reports
  • January 19, 2023
    ITS green light for two wheels
    Cycling is increasingly promoted as a healthy and sustainable mode of transport. So, ask Ronald Jorna and Robin Kleine of Mobycon, what role should ITS play in stimulating active travel?
  • June 17, 2019
    Ansys and BMW develop AV simulation tool
    Engineering company Ansys has joined forces with BMW to develop a simulation tool chain for developing autonomous vehicle (AV) technologies. Eric Bantegnie, vice president and general manager at Ansys, says the solution is designed to address “safety validation requirements for autonomous driving”. Ansys says simulation greatly reduces the need for physical testing which would require billions of miles of road tests across a range of driving conditions. The agreement is expected to help develop