Skip to main content

2getthere’s Group Rapid Transit vehicle passes desert climate test

2getthere’s Group Rapid Tansit (GRT) autonomous vehicle has proven in a simulated desert climate that it can maintain an indoor temperature of 23˚C even in the worst scenario (52˚C outside temperature and 3% humidity). The climate test took place in the Utrecht province and is one of many tests regarding the mega-order received from United Arab Emirates earlier this year. From 2020, five vehicles will perform fully autonomous shuttle services to and from Bluewater Island in Dubai.
October 26, 2017 Read time: 2 mins

8172 2getthere’s Group Rapid Tansit (GRT) autonomous vehicle has proven in a simulated desert climate that it can maintain an indoor temperature of 23˚C even in the worst scenario (52˚C outside temperature and 3% humidity). The climate test took place in the Utrecht province and is one of many tests regarding the mega-order received from United Arab Emirates earlier this year. From 2020, five vehicles will perform fully autonomous shuttle services to and from Bluewater Island in Dubai.

GRT was subject to three tests in weather conditions such as ‘hot dry’ and ‘hot humid’ with a focus on the performance of the air conditioning system (ACS) at the vehicles maximum capacity of 24 passengers.

13 ACS has been developed in collaboration with suppliers DC Airco and Netherlands Aerospace Centre (NLR) who used the simulation of heat management in relation to airflow within the vehicle in its design of the air conditioning. Its development has been partly financed through a 2024 Massachusetts Institute of Technology research grant in which DC Airco and 2getthere have both participated.

The simulated weather conditions included extremely high temperatures and sun radiation with average peaks in the sun radiation of 1,040 Watts per square metre and peaks in temperature of 52˚C around 3.30pm. In the climatic chamber, both peaks were simulated at the same time.

The GRT’s 16 standing passengers represented 120 Watts each and eight seated passengers each represented 100 Watts were simulated by placing a 3000-Watt heat source inside the vehicle. Part of the test focused on performance during transition: the speed at which indoor conditions are brought back to the most comfortable level for passengers after the doors close and the vehicle starts its journey. The most extreme test was based on the vehicle standing still with the doors open for six minutes, but in actual circumstances much shorter stops will be sufficient to allow 24 passengers to enter the vehicle and find their seats.

According to 2getthere the test marks another step towards the operational deployment of the system, scheduled for 2019/2020.

Related Content

  • February 20, 2023
    Dubai stays in The Loop
    93km-long 'sustainable urban highway' aims to connect active travel and public transport
  • February 14, 2019
    Dutch are most ready for AVs - but bikes are an obstacle, says KPMG
    The Netherlands is the number one country in terms of readiness to deploy autonomous vehicles (AVs) – except for one small problem: bicycles. People on two wheels - in this notoriously bike-friendly country - pose a problem for the deployment of AVs in built-up areas, according to research by KPMG. “We have a lot of bicycles,” says Stijn de Groen, manager digital advisory, automotive, at KPMG in the Netherlands. “In urban, crowded areas it will be very difficult to start autonomous driving.” Leavin
  • November 10, 2017
    Navya showcases Autonom cab in Paris
    Navya has unveiled its Autonom Cab (AC) in Paris to address challenges urban populations face when travelling in and around cities. The cab, designed to be completely autonomous, comes without a cockpit, steering wheel or pedals and can carry up to six passengers. It is capable of speeds up to 90km/h, but will average towards 50km/h to conform with local speed limits. The Navya app enables users to order an AC and open and close the vehicle’s doors to start it up. The cab is also capable of pre-empting
  • July 26, 2017
    Lufft launches new weather sensor for gard to reach locations
    Weather measuring equipment manufacturer Lufft has launched StaRWIS, a new easy-to-install and compact stationary sensor for road weather information systems based on a non-invasive, spectroscopic measuring standard. Designed for hard-to-reach or critical locations, the sensor is installed at a height between five and six metres and provides road and dew point temperatures, water film height, road conditions (dry, wet, ice, snow, critical and chemically wet), relative humidity, ice percentage and friction.