Skip to main content

2getthere’s Group Rapid Transit vehicle passes desert climate test

2getthere’s Group Rapid Tansit (GRT) autonomous vehicle has proven in a simulated desert climate that it can maintain an indoor temperature of 23˚C even in the worst scenario (52˚C outside temperature and 3% humidity). The climate test took place in the Utrecht province and is one of many tests regarding the mega-order received from United Arab Emirates earlier this year. From 2020, five vehicles will perform fully autonomous shuttle services to and from Bluewater Island in Dubai.
October 26, 2017 Read time: 2 mins

8172 2getthere’s Group Rapid Tansit (GRT) autonomous vehicle has proven in a simulated desert climate that it can maintain an indoor temperature of 23˚C even in the worst scenario (52˚C outside temperature and 3% humidity). The climate test took place in the Utrecht province and is one of many tests regarding the mega-order received from United Arab Emirates earlier this year. From 2020, five vehicles will perform fully autonomous shuttle services to and from Bluewater Island in Dubai.

GRT was subject to three tests in weather conditions such as ‘hot dry’ and ‘hot humid’ with a focus on the performance of the air conditioning system (ACS) at the vehicles maximum capacity of 24 passengers.

13 ACS has been developed in collaboration with suppliers DC Airco and Netherlands Aerospace Centre (NLR) who used the simulation of heat management in relation to airflow within the vehicle in its design of the air conditioning. Its development has been partly financed through a 2024 Massachusetts Institute of Technology research grant in which DC Airco and 2getthere have both participated.

The simulated weather conditions included extremely high temperatures and sun radiation with average peaks in the sun radiation of 1,040 Watts per square metre and peaks in temperature of 52˚C around 3.30pm. In the climatic chamber, both peaks were simulated at the same time.

The GRT’s 16 standing passengers represented 120 Watts each and eight seated passengers each represented 100 Watts were simulated by placing a 3000-Watt heat source inside the vehicle. Part of the test focused on performance during transition: the speed at which indoor conditions are brought back to the most comfortable level for passengers after the doors close and the vehicle starts its journey. The most extreme test was based on the vehicle standing still with the doors open for six minutes, but in actual circumstances much shorter stops will be sufficient to allow 24 passengers to enter the vehicle and find their seats.

According to 2getthere the test marks another step towards the operational deployment of the system, scheduled for 2019/2020.

For more information on companies in this article

Related Content

  • Vaisala launches roadway ‘mini weather station’
    March 31, 2022
    Measurement specialist Vaisala is well-known for its roadside weather stations that monitor carriageway conditions. But what if you’re a small city or municipality that does not need one of the company’s top-of-the-line solutions?
  • The real case for driverless mobility
    May 13, 2024
    What will automated driving really be good for? Bern Grush of Urban Robotics Foundation offers his thoughts on the big issues around its implementation - and suggests a newly-published book might point the way forward
  • Why GPS may get into a jam
    January 11, 2021
    We all rely on GPS these days – and the technology is prevalent in ITS. But it’s potentially vulnerable so why aren’t we more worried about GPS being jammed, asks Steve Petrie
  • HNTB smart truck parking saves time and money
    September 7, 2014
    While truck parking may not be at the top of most transportation professionals’ minds, it is a subject HNTB is highlighting at its booth – and for good reasons. Commercial truck drivers spend 30 minutes searching for a place to park their rigs, often resorting to highway shoulders, exit ramps or the more risky abandoned and commercial lots.