2getthere’s Group Rapid Transit vehicle passes desert climate test

2getthere’s Group Rapid Tansit (GRT) autonomous vehicle has proven in a simulated desert climate that it can maintain an indoor temperature of 23˚C even in the worst scenario (52˚C outside temperature and 3% humidity). The climate test took place in the Utrecht province and is one of many tests regarding the mega-order received from United Arab Emirates earlier this year. From 2020, five vehicles will perform fully autonomous shuttle services to and from Bluewater Island in Dubai.
October 26, 2017 Read time: 2 mins

8172 2getthere’s Group Rapid Tansit (GRT) autonomous vehicle has proven in a simulated desert climate that it can maintain an indoor temperature of 23˚C even in the worst scenario (52˚C outside temperature and 3% humidity). The climate test took place in the Utrecht province and is one of many tests regarding the mega-order received from United Arab Emirates earlier this year. From 2020, five vehicles will perform fully autonomous shuttle services to and from Bluewater Island in Dubai.

GRT was subject to three tests in weather conditions such as ‘hot dry’ and ‘hot humid’ with a focus on the performance of the air conditioning system (ACS) at the vehicles maximum capacity of 24 passengers.

13 ACS has been developed in collaboration with suppliers DC Airco and Netherlands Aerospace Centre (NLR) who used the simulation of heat management in relation to airflow within the vehicle in its design of the air conditioning. Its development has been partly financed through a 2024 Massachusetts Institute of Technology research grant in which DC Airco and 2getthere have both participated.

The simulated weather conditions included extremely high temperatures and sun radiation with average peaks in the sun radiation of 1,040 Watts per square metre and peaks in temperature of 52˚C around 3.30pm. In the climatic chamber, both peaks were simulated at the same time.

The GRT’s 16 standing passengers represented 120 Watts each and eight seated passengers each represented 100 Watts were simulated by placing a 3000-Watt heat source inside the vehicle. Part of the test focused on performance during transition: the speed at which indoor conditions are brought back to the most comfortable level for passengers after the doors close and the vehicle starts its journey. The most extreme test was based on the vehicle standing still with the doors open for six minutes, but in actual circumstances much shorter stops will be sufficient to allow 24 passengers to enter the vehicle and find their seats.

According to 2getthere the test marks another step towards the operational deployment of the system, scheduled for 2019/2020.

For more information on companies in this article

Related Content

  • In vehicle systems allow drivers to provide travel information
    July 27, 2012
    The use of a Vehicle Data Translator will allow every vehicle on a given segment of road to contribute to a highly accurate, readily accessible source of localised weather information, thus improving safety in all conditions. Sheldon Drobot and William P. Mahoney III, US National Center for Atmospheric Research, Paul A. Pisano, USDOT/Federal Highway Administration, and Benjamin B. McKeever, USDOT/Research and Innovative Technology Administration, write. On the morning of June 10 2009, under the cover of den
    Read More
  • IAM RoadSmart welcomes US study on benefits of humans and new vehicles working together
    August 17, 2017
    UK independent road safety charity IAM RoadSmart has welcomed a new white paper which it says supports its statement that we will not gain the full safety benefits of self-driving cars until every car on the road is connected to each other. Until then, IAM RoadSmart believes that the human mind holds the edge, until such point that connected cars actually ‘talk’ to each other and predict what is happening over the horizon. According to the white paper, Sensor Fusion: A Comparison of Sensing Capabilities of
    Read More
  • Jaguar uses PTV microsimulation tool for C/AV concepts
    April 10, 2019
    Jaguar Land Rover is using PTV’s Vissim, a multi-modal microsimulation tool to simulate and test connected and automated vehicle (C/AV) concepts. Vissim can be used for the modelling of multi-modal urban or motorway networks and for testing the design and feasibility of transport infrastructure projects. It can also be used by researchers, vehicle manufacturers, transport planners, traffic engineers and public authorities to help design future transport systems, testing the impact of C/AVs on road network
    Read More
  • Call for entries for ITS America 2012 State Chapter awards
    March 23, 2012
    ITS America has announced a call for entries for the “2012 Outstanding State Chapter Awards,” presented to highlight and recognise the most outstanding 2011 accomplishments of ITS State Chapters throughout the country. This year’s awards programme incorporates three divisions of chapters based on size. Two awards will be given in each division for Outstanding State Chapter and Membership Growth. California, Florida, Georgia, Gulf Region, Heartland, Michigan, Minnesota, New York, Texas make up Division 1. Di
    Read More

Highlighted Content