Skip to main content

SESA deploys dynamic Trailblazer signs for Michigan DOT

SES America (SESA) recently completed the manufacture and installation of full colour LED dynamic Trailblazer signs for the Michigan Department of Transportation and is set to soon begin manufacturing of additional signs for the next phase of this ongoing work. The signs are part of integrated corridor management along I-75 designed by the Michigan Department of Transportation. Each sign is part of SESA’s Messenger 5000 embedded DMS series, a line of embedded DMS designed to display travel time, toll rate,
May 6, 2016 Read time: 2 mins

7846 SES America (SESA) recently completed the manufacture and installation of full colour LED dynamic Trailblazer signs for the Michigan Department of Transportation and is set to soon begin manufacturing of additional signs for the next phase of this ongoing work.

The signs are part of integrated corridor management along I-75 designed by the Michigan Department of Transportation. Each sign is part of SESA’s Messenger 5000 embedded DMS series, a line of embedded DMS designed to display travel time, toll rate, lane status or traffic control information.

As part of this project, the embedded DMS is intended to divert and manage the influx of traffic, and reduce traffic queues and congestion on freeways for both Macomber and Oakland counties. The signs feature a full colour display capable of showing a variety of arrows that re-direct traffic as necessary on to surface roads and alternate routes. The signs are controlled by SESA’s state-of-the-art NTCIP-compliant SCU6 controller housed in field cabinets near each site. Each sign is placed at strategic locations and display the indicative arrow only when needed.

According to SESA, this combination of static sign and embedded dynamic display is cost effective, advantageously replacing an entire full colour/full matrix DMS.

For the first deployment, energy-efficient technology was utilised to minimize the quantity and size of command, control, and power components, enabling the components to be installed in a small NEMA 4X cabinet attached to each sign structure for the initial deployment. This design was refined for the subsequent deployment, allowing all components to be installed within the sign itself, while maintaining the slim sign housing design required for the project.

Related Content

  • October 26, 2017
    USDoT looks at the costs and potential benefits of connected vehicles
    David Crawford looks at latest lessons learned from the trials of connected vehicles in the US. The progress of connected vehicle (CV) technologies takes centre stage among the hot topics highlighted in the September 2017 edition – the first since 2014 – of the ‘ITS Benefits, Costs and Lessons Learned’ survey from the US ITS Joint Program Office (JPO). The organisation is an arm of the US Department of Transportation (USDoT).
  • May 10, 2017
    Atlanta deploys Bluetooth-based DMS to help improve travel times
    The Cobb County Department of Transportation (CCDOT) in Georgia, USA, has activated six full-colour dynamic message signs (DMS) in the metropolitan Atlanta area in a bid to improve travel times and enable motorists to choose less-congested routes. The LED signs have been installed on Cobb Parkway, South Marietta Parkway, Roswell Road and Spring Road to provide travel time information for common destinations and indicate the congestion level related to specific routes in real time. Travel times on I-75 and C
  • August 21, 2015
    Michigan pilots pedestrian safety signs
    New crosswalk signs have been installed in installed several southwest Michigan cities as part of a joint research project by the Michigan Department of Transportation (MDOT) and Western Michigan University (WMU). The project involves testing the crosswalk signs as potential low-cost safety measures to increase pedestrian safety and motorist awareness. The signs are designed to be permanently affixed to the road but can be removed for the winter when snow removal is necessary. The signs will be removed i
  • January 27, 2012
    Improving urban traffic control in Atlanta
    Hugh Colton, Georgia DOT details move to improve urban traffic control in the Atlanta area. With a significant proportion of traffic using freeways and toll-ways, along with a significant investment in roadway infrastructure, urban arterials are often the poor relation when it comes to ITS investment. Hitherto the primary means of Urban Traffic Control (UTC) has been the ubiquitous traffic signal. Many traffic signals still operate in a standalone mode and traffic detection is often broken, leaving the sign