Skip to main content

Reducing high levels of particles in tunnels

A new study from Sweden’s National Road and Transport Research Institute (VTI) which aims to improve understanding of the differences between inhalable particles in highway versus railway environments has indicated that older types of trains produce more particulate emissions in railroad tunnels than do newer ones. Dust binding, improved paving and reduced studded tyre use could reduce coarse particle levels in road tunnels.
March 1, 2017 Read time: 2 mins

A new study from Sweden’s National Road and Transport Research Institute (5230 VTI) which aims to improve understanding of the differences between inhalable particles in highway versus railway environments has indicated that older types of trains produce more particulate emissions in railroad tunnels than do newer ones. Dust binding, improved paving and reduced studded tyre use could reduce coarse particle levels in road tunnels.

The tests were carried out in Sweden at Arlanda Central station beneath Arlanda Airport and in the Söderleden road tunnel in central Stockholm. The results indicate that the environment of the studied railroad tunnel is characterised by peaks in coarse particle concentration. Some trains can be tied to emissions of ultrafine particles which consist mainly of iron, with lesser amounts of copper, zinc and other metals.

The main focus of measures to remedy high particle counts in railway tunnels has so far been on preventing exposure by separating trains from platforms or using ventilation to remove polluted air, but few studies have examined the means available to prevent the emissions themselves.

According to VTI researcher Mats Gustafsson, the study demonstrates that it is possible to reduce particulate emissions by identifying and improving train types as well as individual trains and their characteristics.

Road tunnels are characterised by high levels of ultrafine particles and high levels of coarse particles when conditions are dry. Because the traffic in such tunnels is more intense than in railroad tunnels, the particle levels are more consistently high during rush hours.

“The options available to combat coarse particles in road tunnels comprise reduced studded tyre use, better paving, and efficient dust binding and cleaning”, said Gustafsson.

The ultrafine particles that occur in high concentrations derive from vehicle exhaust and can be addressed by reducing traffic volumes, improving exhaust treatment, and lowering the proportion of heavy traffic, he says.

Related Content

  • February 1, 2012
    Environmental impact assessments - where now?
    Peter George, MVA Consultancy, questions the future direction of environmental impact assessments
  • October 24, 2012
    Navtech Radar and Vysionics ITS announce strategic partnership
    Navtech Radar and Vysionics ITS are to enter into a strategic partnership that will combine Navtech’s expertise in millimetre-wave wide-area surveillance technology with Vysionics’ machine vision-based Automatic Number Plate Recognition (ANPR) and average speed measurement competencies.Navtech Radar and Vysionics ITS are to enter into a strategic partnership that will combine Navtech’s expertise in millimetre-wave wide-area surveillance technology with Vysionics’ machine vision-based Automatic Number Plate
  • June 13, 2014
    San Jose implements Intel technology for a smarter city
    In the US, the city of San José and Intel are collaborating to further the city's Green Vision initiative with the use of Intel technology. The pilot program, known as Smart Cities USA, is Intel's first smart city implementation in the United States and is intended to improve air and water quality, reduce noise pollution, and increase transportation efficiency. According to Intel, the scalability of its architecture provides the intelligence and flexibility necessary for cities to quickly deploy a range
  • September 10, 2024
    Bridge & tunnel management: seeing the bigger picture
    A variety of technologies are available to monitor the health of critical infrastructure – and to keep the drivers who use it safe by flagging incidents while reducing false alarms