Skip to main content

Lorry emissions checks to start at the roadside

From August 2017, roadside checks of lorries carried out by the UK Driver and Vehicle Standards Agency (DVSA) will include an emissions check.
June 26, 2017 Read time: 2 mins

From August 2017, roadside checks of lorries carried out by the UK Driver and Vehicle Standards Agency (DVSA) will include an emissions check.

DVSA will be target lorry drivers and operators who try to cheat vehicle emissions. The new checks will target those who break the law and will help to improve air quality.

DVSA’s enforcement staff and their European counterparts have found evidence that drivers and operators use emissions cheat devices to cut the cost of operating. These include:

- using devices designed to stop emissions control systems from working
- removing the diesel particulate filter or trap
- using cheap, fake emission reduction devices or diesel exhaust fluid
- using illegal engine modifications which result in excessive emissions
- removing or bypassing the exhaust gas recirculation valve

DVSA enforcement officers will give the driver and operator 10 days to fix the emissions system if they find a vehicle with tampered emissions readings. If the emissions system isn’t fixed within that time, DVSA will issue a fine and stop the vehicle being used on the road.

DVSA enforcement staff can insist that a vehicle be taken off the road immediately if they find a driver or operator is repeatedly offending.

DVSA will investigate all Great Britain operators cheating emissions and pass the findings to the Traffic Commissioners for Great Britain, who have the power to remove operator licences.

DVSA will also continue to work with its counterpart agencies across Europe and further afield, to make sure that all offences committed by non-Great Britain hauliers are dealt with locally.

Related Content

  • February 2, 2012
    Transition to all electronic tolling leads to cost savings
    How a temporary congestion-relief solution resulted in the North Texas Tollway Authority's transition to all-electronic toll collection and potential savings of up to $472 million by 2045. By Carla Kienast, ETC Corporation
  • April 14, 2022
    Weighing up the future with AI
    There is broad agreement that artificial intelligence will be an important part of Weigh in Motion as we go forward – but Adam Hill finds that not everyone agrees quite how close we are to that point
  • July 20, 2015
    New report indicates reduction in London’s pollution
    A new report, produced by experts at King's College London, for the first time quantifies the health and economic effects of the air pollutant nitrogen dioxide (NO2), where all previous studies have focused on particulate matter (PM2.5). Combined together the effects of both pollutants reveal a higher health impact than previously estimated after taking into account this further pollutant. The study also found that nearly half the health impacts are caused by air pollution outside London such as diesel
  • March 16, 2012
    Weigh in motion technology aids overweight vehicle reduction
    Innovative use of truck weighing technology is growing as strategies aimed at reducing numbers of overweight vehicles gather momentum. Business is generally good at present in the truck weighing sector in general, and weigh-in-motion (WIM) technology in particular, according to leading suppliers of systems serving to help reduce overloading. Strategies aimed at deterring excessive truck loading – cutting damage to road networks and risks to safety – vary considerably worldwide, with some governments draggin