Skip to main content

Lorry emissions checks to start at the roadside

From August 2017, roadside checks of lorries carried out by the UK Driver and Vehicle Standards Agency (DVSA) will include an emissions check.
June 26, 2017 Read time: 2 mins

From August 2017, roadside checks of lorries carried out by the UK Driver and Vehicle Standards Agency (DVSA) will include an emissions check.

DVSA will be target lorry drivers and operators who try to cheat vehicle emissions. The new checks will target those who break the law and will help to improve air quality.

DVSA’s enforcement staff and their European counterparts have found evidence that drivers and operators use emissions cheat devices to cut the cost of operating. These include:

- using devices designed to stop emissions control systems from working
- removing the diesel particulate filter or trap
- using cheap, fake emission reduction devices or diesel exhaust fluid
- using illegal engine modifications which result in excessive emissions
- removing or bypassing the exhaust gas recirculation valve

DVSA enforcement officers will give the driver and operator 10 days to fix the emissions system if they find a vehicle with tampered emissions readings. If the emissions system isn’t fixed within that time, DVSA will issue a fine and stop the vehicle being used on the road.

DVSA enforcement staff can insist that a vehicle be taken off the road immediately if they find a driver or operator is repeatedly offending.

DVSA will investigate all Great Britain operators cheating emissions and pass the findings to the Traffic Commissioners for Great Britain, who have the power to remove operator licences.

DVSA will also continue to work with its counterpart agencies across Europe and further afield, to make sure that all offences committed by non-Great Britain hauliers are dealt with locally.

Related Content

  • Imagsa debuts Chronos’Spot stereoscopic vision system
    March 25, 2014
    Imagsa Technologies, a high-tech company founded in 2006 to develop high-speed intelligent cameras, will today launch a major new camera, the Chronos’Spot. The company is a pioneer in the use of massive parallelism to analyse 270 images per second with 2048 x 1024 pixel resolution (2 megapixel). The Chronos'Spot stereoscopic vision system combines two of these smart cameras to capture and analyse a total of 1080 megapixels per second.
  • Do we need a new approach to ITS and traffic management?
    January 31, 2012
    In an article which has implications for the European Electronic Toll Service, ASECAP's Kallistratos Dionelis asks whether the approach we currently take to major ITS system implementations is always the best or healthiest. I was asked recently to write a paper on the technology-oriented future of transport. To paraphrase, I started with: "The goal of European policy-makers is to establish a transport system which meets society's economic, social and environmental needs, satisfying in parallel a rising dema
  • Leeds orders CCTV vehicle to reduce congestion and improve safety
    March 28, 2018
    Leeds City Council has received a new mobile enforcement vehicle from Videalert to target key areas where non-compliant drivers cause congestion or safety issues. It will also provide unattended enforcement of offences such as parking on city centre bus stops and school keep clear markings. Videalert’s system automates the construction of video evidence packs which are reviewed by council operatives prior to sending confirmed offences to the back-office processing system for the issuance of penalty charge
  • Plate matching technology more accurate than conventional OCR
    February 3, 2012
    EngiNe srl's patented Plate Matching technique is something of a paradox, in that it achieves formal vehicle identification without recognising, in the accepted sense, the characters on its number plate. Here, Angelo Dionisi of ENG Group explains how it works