Skip to main content

Lorry emissions checks to start at the roadside

From August 2017, roadside checks of lorries carried out by the UK Driver and Vehicle Standards Agency (DVSA) will include an emissions check.
June 26, 2017 Read time: 2 mins

From August 2017, roadside checks of lorries carried out by the UK Driver and Vehicle Standards Agency (DVSA) will include an emissions check.

DVSA will be target lorry drivers and operators who try to cheat vehicle emissions. The new checks will target those who break the law and will help to improve air quality.

DVSA’s enforcement staff and their European counterparts have found evidence that drivers and operators use emissions cheat devices to cut the cost of operating. These include:

- using devices designed to stop emissions control systems from working
- removing the diesel particulate filter or trap
- using cheap, fake emission reduction devices or diesel exhaust fluid
- using illegal engine modifications which result in excessive emissions
- removing or bypassing the exhaust gas recirculation valve

DVSA enforcement officers will give the driver and operator 10 days to fix the emissions system if they find a vehicle with tampered emissions readings. If the emissions system isn’t fixed within that time, DVSA will issue a fine and stop the vehicle being used on the road.

DVSA enforcement staff can insist that a vehicle be taken off the road immediately if they find a driver or operator is repeatedly offending.

DVSA will investigate all Great Britain operators cheating emissions and pass the findings to the Traffic Commissioners for Great Britain, who have the power to remove operator licences.

DVSA will also continue to work with its counterpart agencies across Europe and further afield, to make sure that all offences committed by non-Great Britain hauliers are dealt with locally.

Related Content

  • IBTTA: industry must commit to trust and accountability
    August 23, 2018
    Without a commitment to trust and accountability, the modern road tolling industry would not have the bedrock which it requires – and which customers demand, says IBTTA’s Bill Cramer When Tim Stewart, executive director of Colorado’s E-470 Public Highway Authority, settled on ‘trust and accountability’ as the themes for his year as IBTTA president, it was a very deliberate choice. Stewart was looking for language that would help deliver the global tolling industry’s message of service excellence to cust
  • Transportation applications move to machine vision’s mainstream
    June 11, 2015
    The adaptation of machine vision to transport applications continues apace. That the machine vision industry is taking traffic installations seriously is evident by the amount of hardware and software products tailor-made for ITS applications that are now available on the market. A good example comes from US-based Gridsmart Technologies which has developed a single wire fisheye camera that provides a horizon to horizon view for use at intersections. Not only does the single camera replace four or more in a
  • Maryland targets 2030 e-bus transition
    January 7, 2022
    Maryland DoT MTA to change 50% of diesel/hybrid buses to zero-emission in next eight years
  • Rand McNally devices integrate with Drivewyze PreClear service
    March 27, 2014
    Rand McNally and Drivewyze have signed an agreement to provide the Drivewyze PreClear weigh station bypass service for Rand McNally's suite of mobile fleet management devices. PreClear enables commercial truck drivers to clear weigh station requirements before reaching a location, thereby deferring stops and bypassing weigh stations up to 98 per cent of the time depending on the operator's safety score. As a truck approaches a weigh station, safety-related data are communicated in real-time. If the v