Skip to main content

Idaho developing wildlife-detection system to improve driver safety

Idaho Transportation Department’s (ITD) research program has initiated a project to evaluate an innovative new wildlife-detection system that may bring improved safety to area highways and reduce personal injury and property damage. The project is the result of a request from ITD’s northern Idaho office, and is a partnership between ITD and the Western Transportation Institute (WTI) of Montana State University. Collisions between wildlife and vehicles can be a big problem, and common in rural states such
February 15, 2016 Read time: 2 mins
7477 Idaho Transportation Department’s (ITD) research program has initiated a project to evaluate an innovative new wildlife-detection system that may bring improved safety to area highways and reduce personal injury and property damage. The project is the result of a request from ITD’s northern Idaho office, and is a partnership between ITD and the Western Transportation Institute (WTI) of Montana State University.

Collisions between wildlife and vehicles can be a big problem, and common in rural states such as Idaho, accounting for more than US$8.4 billion nationwide each year, and costing Idaho a total of nearly US$20 million last year.

Preliminary studies indicate that vehicle-animal collisions could be reduced by at least one-third by using the system. “Wildlife-vehicle collisions are a costly safety issue for Idaho travellers,” said ITD research program manager Ned Parrish. “Injuries and the loss of life, human or wild animal, are broad social and environmental concerns.”  

The system, which was developed by Boise’s Sloan Security Group, uses a Doppler radar sensor mounted on a pole 20-25 feet above the ground, allowing the sensor to ‘look over’ semi-trucks to detect large animals on both sides of the road and on the road itself for several hundred metres. The system is connected to flashing warning beacons that are activated to alert drivers of animals on or near the roadway.

Related Content

  • July 24, 2017
    Truck platooning trials take to the highways
    There is rising enthusiasm in America and beyond for the concept of truck platooning with trials being planned in several US states, as David Crawford reports. Growing numbers of US states are considering or implementing plans for trials of electronically-linked truck platooning on public road networks. This is in response to the interest being shown by the US$70bn a year road freight industry, where fuel represents 41% of the operating costs making the prospect of improving fuel economy by trucks travellin
  • May 2, 2013
    Cycle safety device alerts truck drivers
    An innovative cycle safety device designed to alert truck drivers to the presence of a cyclist is about to be launched. The Cycle Alert system not only alerts drivers to a potential risk in areas frequented by cyclists, it also facilitates a direct warning from a cyclist straight to the vehicle driver. The system has three elements: a unit that is fitted to the bicycle, or worn by a cyclist on their person or helmet, sensors that are fitted to the HGV and a cab-mounted device to alert the driver. The three
  • October 24, 2014
    Workzone safety can be economically viable
    David Crawford looks how workzone safety can be ‘economically viable’. Highway maintenance is one of the most dangerous construction industry occupations in Europe. Research from The Netherlands on fatal crashes indicates that the risk facing road workzone operatives is ‘significantly higher’ than that for the general construction workforce. A survey carried out by the Highways Agency, which runs the UK’s motorway and trunk road network, has suggested that 20% of road workers have suffered injuries from pa
  • February 20, 2015
    Groups seek electronic collision alert devices on big trucks
    The US Advocates for Highway and Auto Safety, the Truck Safety Coalition, the Center for Auto Safety and Road Safe America have filed a petition with the National Highway Traffic Safety Administration (NHTSA) requesting that the agency initiate rulemaking to require forward collision avoidance and mitigation braking (F-CAM) systems on all new large trucks and buses with a gross vehicle weight rating (GVWR) of 10,000 pounds or more. F-CAM technology uses radar and sensors to first alert the driver and then t