Skip to main content

Heavy-duty radar detection

Brigade has launched a new heavy-duty radar detection system to enable construction vehicles and mobile plant equipment to manoeuvre more safely, preventing costly vehicle damage.
February 3, 2012 Read time: 2 mins
4065 Brigade Electronics has launched a new heavy-duty radar detection system to enable construction vehicles and mobile plant equipment to manoeuvre more safely, preventing costly vehicle damage. As the company points out, most construction vehicles and mobile plant equipment have extensive blind spots which make manoeuvring both difficult and dangerous. Brigade's Xtreme Backsense system solves this by detecting moving and stationary objects around the vehicle and warning the driver in the cab.

The system warns the driver that an object is in range by means of both graduated visual and audible warnings. The visual display has five LEDs each representing one fifth of the detection range, whilst the intermittent audible sound increases in rate as an object becomes closer. Xtreme Backsense can be programmed to maximum detection ranges of six, eight or ten metres depending on requirements and has improved precision with the last graduation only 80cm from the sensor. This graduated warning system allows the driver to judge speed and direction with limited visibility.

Multiple sensors can be connected to the rear, front or side with a single display to increase the detection area and maximise safety. Additionally, Xtreme Backsense can be integrated with other vehicle safety devices which enhance operator awareness, such as camera monitor systems and reversing alarms, the latter also helping to warn other workers.

For more information on companies in this article

Related Content

  • UK's Hindhead tunnel pushes the boundaries of traffic management
    January 23, 2012
    The new Hindhead Tunnel is the first in the UK to use radar-based incident detection. Paul Arnold, project manager with the Highways Agency, talks about the project. The comparatively remote location of the A3 Hindhead Tunnel has resulted in it becoming one of the most sophisticated in the UK in terms of monitoring and control systems, according to Paul Arnold, project manager for the Highways Agency (HA), which manages strategic roads in England and Wales. It is the first tunnel in the UK to use radar for
  • Intersection collision avoidance system trial
    January 31, 2012
    Although much of the emphasis of research into intersection management has tended to concentrate on the needs of urban locations, there remain specific issues pertaining to rural intersections which need to be addressed. Here, Rebecca Szymkowski and Greg Helgeson, Wisconsin DOT, Todd Szymkowski, University of Wisconsin-Madison, and Craig Shankwitz and Arvind Menon, University of Minnesota detail progress on an intersection collision avoidance system for more remote locations.
  • Smart cameras offer real-time alerts
    April 10, 2014
    Intelligent traffic cameras open up a host of possibilities for traffic planners and controllers alike. If traffic management centres (TMCs) around the world are to cope with the increasing demands of growing traffic flows while maintaining or improving transport safety and efficiency, then video monitoring will have to be supplemented by automated warnings of incidents or deviations. According to Patrik Anderson, business development director at Swedish camera manufacturer Axis Communications, it is no
  • Truvelo launches spot speed industrial camera
    February 9, 2017
    Speed camera specialist Truvelo is launching its new VIA-Cam industrial spot speed camera at Traffex in April 2017. VIA-Cam is aimed at companies with an on-site speeding problem and who need a permanent camera capturing images of vehicles exceeding the speed limit. These include car manufacturers, airports, oil refineries, steel and chemical plants, ports, quarries and distribution centres. VIA-Cam comprises a high definition camera, radar unit and IR lighting module, housed in a modern compact weathe