Vehicle to improve safety and reduce disruption on motorways

A new maintenance assistance vehicle (MAV) developed by Highways England and Mott MacDonald to help replace overhead signs was inspired by an aircraft catering vehicle and is set to reduce the duration of roadworks.
September 16, 2016 Read time: 1 min

A new maintenance assistance vehicle (MAV) developed by 8101 Highways England and 1869 Mott MacDonald to help replace overhead signs was inspired by an aircraft catering vehicle and is set to reduce the duration of roadworks.

Traditionally, signs are mounted and removed using a flat-bed truck, crane and access platform – a process that can take up to 40 minutes. However with the MAV’s hydraulically elevating body, this can be achieved in around 20 to 25 minutes by using a small jib crane which is mounted on the vehicle itself.

Once elevated to the correct height, the jib crane lifts the detached sign off the gantry and the operatives use a trolley to move it into the truck’s main body. This procedure is reversed when installing a new signs.

The hydraulically powered scissor lift enables the signs at heights of up to 8.5m to be serviced in wind speeds of up to 47mph, while its CCTV cameras enable the driver to correctly position the vehicle below the gantry before maintenance and monitor the operatives while they work.

Urban Traffic Control

For more information on companies in this article

Related Content

  • European tunnel safety steps up a gear
    September 19, 2017
    David Crawford reviews the latest safety systems installed in European tunnels. Blueprints for the safer road tunnels of the future are emerging fast as European operators invest in technologies to enhance travellers’ prospects of surviving an accident. Central to modern emergency planning is the principle that, following an incident, drivers should be enabled to rescue themselves and their passengers with the aid of prompt and correct identification and communication of the hazard. Roles for cooperativ
    Read More
  • On-road and in-vehicle are not in competition
    May 18, 2018
    The integrity and accuracy of data that can be verified by weigh-in-motion technology has been improving for decades – and the range of WIM applications is increasing at a tremendous pace. Chris Koniditsiotis, president of the International Society for Weigh-in-Motion (ISWIM) and CEO of Transport Certification Australia (TCA), began his career in 1985 as a pavements engineer. “When I joined this portfolio, the integrity, accuracy, and sampling frequency of mass information delivered at best an estimate, us
    Read More
  • Transmax trials emergency vehicle ‘green wave’
    December 6, 2013
    Existing equipment used in Australian emergency vehicle ‘green wave’ trial. Despite the lights and sirens, accidents between the motoring public and emergency vehicles on their way to/from the scene of an incident are relatively frequent. Figures from various sources indicate that road accidents are the second most frequent cause of death for on-duty fire fighter fatalities and that more than 90% of ambulance and fire engine accidents occur when the lights are on and the sirens wailing. Other studies indica
    Read More
  • Welsh default 20mph limit leads to 4mph drop in driver speed
    February 22, 2024
    Transport for Wales' preliminary figures show average reduction in first three months
    Read More

Highlighted Content