Vehicle to improve safety and reduce disruption on motorways

A new maintenance assistance vehicle (MAV) developed by Highways England and Mott MacDonald to help replace overhead signs was inspired by an aircraft catering vehicle and is set to reduce the duration of roadworks.
September 16, 2016 Read time: 1 min

A new maintenance assistance vehicle (MAV) developed by 8101 Highways England and 1869 Mott MacDonald to help replace overhead signs was inspired by an aircraft catering vehicle and is set to reduce the duration of roadworks.

Traditionally, signs are mounted and removed using a flat-bed truck, crane and access platform – a process that can take up to 40 minutes. However with the MAV’s hydraulically elevating body, this can be achieved in around 20 to 25 minutes by using a small jib crane which is mounted on the vehicle itself.

Once elevated to the correct height, the jib crane lifts the detached sign off the gantry and the operatives use a trolley to move it into the truck’s main body. This procedure is reversed when installing a new signs.

The hydraulically powered scissor lift enables the signs at heights of up to 8.5m to be serviced in wind speeds of up to 47mph, while its CCTV cameras enable the driver to correctly position the vehicle below the gantry before maintenance and monitor the operatives while they work.

Urban Traffic Control

For more information on companies in this article

Related Content

  • Drivers urged: ‘Don’t put road workers lives at risk’
    May 23, 2018
    A road junction in Merseyside, UK, has become a hotspot for life-threatening incidents to construction workers, says Highways England. Contractors have reported 23 incidents in two months where their safety has been put at risk by drivers ignoring overnight closures. Road users have driven into roadworks for the £3m improvement project at Switch Island, where the M57, M58 and three A roads all join. One lorry driver travelled through the construction area without stopping - forcing workers to get out
    Read More
  • Workzone safety can be economically viable
    October 24, 2014
    David Crawford looks how workzone safety can be ‘economically viable’. Highway maintenance is one of the most dangerous construction industry occupations in Europe. Research from The Netherlands on fatal crashes indicates that the risk facing road workzone operatives is ‘significantly higher’ than that for the general construction workforce. A survey carried out by the Highways Agency, which runs the UK’s motorway and trunk road network, has suggested that 20% of road workers have suffered injuries from pa
    Read More
  • Austria’s answer to temporary traffic problems
    December 22, 2015
    ASFINAG has developed a mobile traffic monitoring and guidance system through a pre-commercial procurement project. Drivers have become accustomed to roadside and gantry-mounted traffic guidance and control systems along the major roads and main motorway sections. But there are occasions when intense monitoring is required on a temporary basis along motorway sections without traffic guidance and control systems and on federal and national roads too. Examples include the monitoring of the traffic flow during
    Read More
  • Pioneering IntelliDrive technologies in Michigan
    February 2, 2012
    Pete Goldin reports on upgrades to the USDOT's Michigan Test Bed, where IntelliDrive technologies are being pioneered
    Read More

Highlighted Content