Vehicle to improve safety and reduce disruption on motorways

A new maintenance assistance vehicle (MAV) developed by Highways England and Mott MacDonald to help replace overhead signs was inspired by an aircraft catering vehicle and is set to reduce the duration of roadworks.
September 16, 2016 Read time: 1 min

A new maintenance assistance vehicle (MAV) developed by 8101 Highways England and 1869 Mott MacDonald to help replace overhead signs was inspired by an aircraft catering vehicle and is set to reduce the duration of roadworks.

Traditionally, signs are mounted and removed using a flat-bed truck, crane and access platform – a process that can take up to 40 minutes. However with the MAV’s hydraulically elevating body, this can be achieved in around 20 to 25 minutes by using a small jib crane which is mounted on the vehicle itself.

Once elevated to the correct height, the jib crane lifts the detached sign off the gantry and the operatives use a trolley to move it into the truck’s main body. This procedure is reversed when installing a new signs.

The hydraulically powered scissor lift enables the signs at heights of up to 8.5m to be serviced in wind speeds of up to 47mph, while its CCTV cameras enable the driver to correctly position the vehicle below the gantry before maintenance and monitor the operatives while they work.

Urban Traffic Control

For more information on companies in this article

Related Content

  • I-80 Smart Corridor sets the ITS standard for California's Bay Area
    March 23, 2015
    Colin Sowman looks at California’s ‘smartest’ road which will open this spring to counter congestion and accidents on one of the Bay Area’s busiest interstates. Interstate 80 (I-80) is one of the busiest roads in the San Francisco Bay area with up to 270,000 vehicles using the corridor every day. The section between the Carquinez Bridge in Crockett and the Bay Bridge not only suffers congestion during the working week but also at weekends. Traditional remedies such as building additional lanes (there are al
    Read More
  • High-speed WIM moves onto the main highway
    May 24, 2016
    High-speed weigh-in-motion is starting to make its mark on both sides of the Atlantic. As a transit country the Czech Republic experiences a large number of overloaded vehicles, which greatly increase highway maintenance costs. This prompted its Transport Ministry to trial an extension of the capabilities of the existing truck tolling system to allow the dynamic high-speed weighing of cargo vehicles. In effect the tolling enforcement gantries become weigh-in-motion (WIM) locations.
    Read More
  • FTA calls for greater reliability on road network following improvements at Dartford
    October 14, 2015
    Drivers using the Dartford Crossing at peak times are saving around an hour and a half every week thanks to Dart Charge, according to Highways England. New figures released by Highways England show that journeys over the Dartford Crossing, which cost £62million (US$95 million) to convert to free-flow tolling, are up to 56 per cent faster than before payment barriers were removed. Drivers at peak times save up to 14 minutes southbound and seven minutes northbound.
    Read More
  • Vision technology lifts blinkers from tunnel vision
    December 6, 2017
    Sony’s Jerome Avenel looks at how advances in imaging technology are helping improve safety. On the 24th March 1999, a Belgian truck transporting flour and margarine through the 11.6km Mont Blanc tunnel caught alight when a cigarette stub entered the engine induction snorkel, lighting the paper air filter. The fire left over 30 dead and many more injured. At the time, the Mont Blanc tunnel disaster was the world’s worst tunnel fire.
    Read More

Highlighted Content