Skip to main content

Swarco installs 34 VAS signs to calm speeding in Brent

Swarco Traffic has installed 34 vehicle-activated signs (VAS) at key locations in the UK borough of Brent to support its council in reducing collisions, road danger and accidents that involve powered two-wheelers (P2Ws) such as motorcycles and mopeds. Motorcycles account for 19% of all road user deaths despite representing 1% of total road traffic, according to the National Think Road Safety Campaign. VAS are activated when an approaching vehicle is travelling over the system’s pre-set threshold.
June 26, 2018 Read time: 2 mins

129 Swarco Traffic has installed 34 vehicle-activated signs (VAS) at key locations in the UK borough of Brent to support its council in reducing collisions, road danger and accidents that involve powered two-wheelers (P2Ws) such as motorcycles and mopeds. Motorcycles account for 19% of all road user deaths despite representing 1% of total road traffic, according to the National Think Road Safety Campaign.

VAS are activated when an approaching vehicle is travelling over the system’s pre-set threshold. They display the speed with either an instruction to slow down or a sad face in red. A happy face or thank you is shown in green for drivers travelling within the speed limits.

Most of the VAS are fixed to existing light columns while some are solar powered. The signs are Conformité Européene (CE)-marked for quality and safety and are built with the latest Swarco LEDs, which are said to provide optical output for increased reliability as well as reduced power consumption.

Chhaganlal J Dabhi, project engineer for Brent Council’s Highways and Infrastructure Service, said: “One of the most common causes of accidents involving P2Ws is high speeds. And high speeds can cause severe injuries and fatalities, particularly for a motorbike rider who is the most exposed and vulnerable. However, we also know that one of the most effective measures to reduce accidents can be to inform all road users of the hazards and prevailing dangers, and advise them accordingly.”

For more information on companies in this article

Related Content

  • High-tech road studs can help tackle accident trend
    October 3, 2014
    According to road safety engineer Alan Vass of the Traffic and Road Safety section of Ayrshire Roads Alliance in Scotland, LED road studs have contributed to a 100 per cent reduction in incidents on a stretch of the A719 road in the county. Vass says the active studs, which use LED and solar technology to create delineation shown to be far more effective than traditional retro-reflective studs, could hold the key to a brighter future. He said: “There had been a number of accidents on the A719 near Wat
  • IBTTA’s Jones sees turbulent times and a bright future for tolling
    November 10, 2017
    Colin Sowman talks to IBTTA’s Pat Jones about the future of tolling in a fast-changing world. Pat Jones may have been executive director and CEO of the International Bridge, Tunnel and Turnpike Association (IBTTA) for 15 years but in his words: “Never before have I seen so much change coming so fast in the transportation and tolling industry.” Amidst all this change, tolling companies are asked to provide funding for roadway building or improvements which will be repaid for over, say, a 30-year concess
  • Caltrans sends clear message on Swarco McCain CMS
    April 25, 2023
    Swarco McCain is highlighting that the California Department of Transportation (Caltrans) has renewed their partnership for the supply of industry standard-setting changeable message signs (CMS).
  • euroFOT study demonstrates benefits of driver assistance systems
    June 26, 2012
    Today, the euroFOT consortium published the findings of a four-year study focused on the impact of driver assistance systems in the Europe. The €22 million (US$27.5 million) European Field Operational Test (euroFOT) project which began in June 2008 and involved 28 companies and organisations, was led by Aria Etemad from Ford’s European Research Centre in Aachen, Germany. The study looked at existing technologies and their potential to both enhance safety and reduce environmental impact. euroFOT also reveale