SBC-2400 traffic control system

The SBC-2400 from Zwiesler Resources is a cost-effective traffic control system based on a single-board controller running 170 software. The integrated set of components for advanced traffic control is comprised of a CPU, power board, conflict monitor unit, traffic cabinet, traffic control software and provision for 12V solar power.
July 19, 2012 Read time: 1 min
The SBC-2400 from Zwiesler Resources is a cost-effective traffic control system based on a single-board controller running 170 software. The integrated set of components for advanced traffic control is comprised of a CPU, power board, conflict monitor unit, traffic cabinet, traffic control software and provision for 12V solar power.

Low in cost and small enough to fit in a 30x30x30cm traffic cabinet, the system is based on the SBC-2400 Controller CPU and one or two SSC power boards to control 12 or 24 signal outputs. The CPU board accommodates eight vehicle detector inputs plus five control inputs. The maximum of 24 SSC board outputs are divided equally between two 20-pin box headers, which also bring +12 VDC into the cabinet to power the logic.

According to the company, the system meets worldwide needs for advanced traffic control in the minimum space; in addition, by being able to utilise available 170 software the system can be used for applications other than intersection control, such as ramp metering, sign control and freeway incident management.
Urban Traffic Control

Related Content

  • Multi-function loop detector from Reno
    November 26, 2013
    The latest multi-function inductive loop vehicle detectors from intelligent transportation systems supplier Reno A&E are designed to reliably detect all vehicles, as well as differentiating cycles from all other vehicles. The Model C-1101-B and C-1201-B two channel loop detectors are available in 170/2070, NEMA TS1/TS2, ITS and ATC cabinet configurations and provide intersection safety without sacrificing efficiency Additional passage time for bicycles can be provided by either the loop detector or the con
    Read More
  • Multi-function loop detector from Reno
    November 26, 2013
    The latest multi-function inductive loop vehicle detectors from intelligent transportation systems supplier Reno A&E are designed to reliably detect all vehicles, as well as differentiating cycles from all other vehicles. The Model C-1101-B and C-1201-B two channel loop detectors are available in 170/2070, NEMA TS1/TS2, ITS and ATC cabinet configurations and provide intersection safety without sacrificing efficiency Additional passage time for bicycles can be provided by either the loop detector or the con
    Read More
  • Trafficware: Digitised transport tech ‘is the new asphalt’
    April 16, 2019

    Trafficware provides the tech to manage intersections all over the world. Colin Sowman asks CEO Jon Newhard about the ‘questions behind the questions’

    Last year, Trafficware CEO Jon Newhard negotiated the company’s acquisition by Cubic Corporation and now serves as general manager of Trafficware within Cubic’s Transportation Systems business unit.

    Read More
  • High-speed WIM moves onto the main highway
    May 24, 2016
    High-speed weigh-in-motion is starting to make its mark on both sides of the Atlantic. As a transit country the Czech Republic experiences a large number of overloaded vehicles, which greatly increase highway maintenance costs. This prompted its Transport Ministry to trial an extension of the capabilities of the existing truck tolling system to allow the dynamic high-speed weighing of cargo vehicles. In effect the tolling enforcement gantries become weigh-in-motion (WIM) locations.
    Read More

Highlighted Content