SBC-2400 traffic control system

The SBC-2400 from Zwiesler Resources is a cost-effective traffic control system based on a single-board controller running 170 software. The integrated set of components for advanced traffic control is comprised of a CPU, power board, conflict monitor unit, traffic cabinet, traffic control software and provision for 12V solar power.
July 19, 2012 Read time: 1 min
The SBC-2400 from Zwiesler Resources is a cost-effective traffic control system based on a single-board controller running 170 software. The integrated set of components for advanced traffic control is comprised of a CPU, power board, conflict monitor unit, traffic cabinet, traffic control software and provision for 12V solar power.

Low in cost and small enough to fit in a 30x30x30cm traffic cabinet, the system is based on the SBC-2400 Controller CPU and one or two SSC power boards to control 12 or 24 signal outputs. The CPU board accommodates eight vehicle detector inputs plus five control inputs. The maximum of 24 SSC board outputs are divided equally between two 20-pin box headers, which also bring +12 VDC into the cabinet to power the logic.

According to the company, the system meets worldwide needs for advanced traffic control in the minimum space; in addition, by being able to utilise available 170 software the system can be used for applications other than intersection control, such as ramp metering, sign control and freeway incident management.
Urban Traffic Control

Related Content

  • GPS delivers accurate journey time data for UTC
    January 27, 2012
    A new solution developed as a consequence of the UK's Freeflow project fuses GPS and UTC loop data to give more accurate predictions of journey times, benefting network managers and travellers alike. By Matt Cowley and Gareth Jones, Trakm8 and John Polak and Rajesh Krishnan, Imperial College London
    Read More
  • Vehicle identification systems aid dynamic bus operations
    April 24, 2013
    David Crawford looks at a global trend towards more efficiency in less space As buses gain increased profile in the public transport mix needed for modal shift, attention is turning towards improving terminal layouts for more efficient handling of services and passengers. Locations, too, tend to be in central areas of cities, where sites are restricted and land values high. Enter the dynamic bus station, which uses modern vehicle identification systems to optimise space use and streamline service operation
    Read More
  • Wider uses for weigh in motion data
    March 18, 2014
    Colin Sowman talks to Terry Bergan of International Road Dynamics about the latest uses of weigh-in-motion systems. Raising allowable truck weight limits improve transport efficiency but leaves an ever-increasing number of bridges vulnerable to being overloaded and damaged by vehicles heavier, and in some cases far heavier, than they were designed to carry. The simplistic solution is to impose weight restrictions and erect appropriate signs - but this could have severe knock-on effect on trucking operations
    Read More
  • Q-Free aims to make traffic signal controller into 'smartphone' with Velocity
    June 29, 2023
    AI-enabled ARM processor will 'massively' increase computing power at intersections
    Read More

Highlighted Content