Fiberlink Matrix 16x16 optical router

The Communications Specialties 16x16 Fiberlink Matrix, model OM16, is part of the fully configurable and SMPTE-compliant Fiberlink Matrix family which has the ability to configure the number of inputs and outputs in any fashion up to 16x16 for model OM16 and up to 32x32 for model OM32.
February 6, 2012 Read time: 2 mins
The 1045 Communications Specialties 16x16 Fiberlink Matrix, model OM16, is part of the fully configurable and SMPTE-compliant Fiberlink Matrix family which has the ability to configure the number of inputs and outputs in any fashion up to 16x16 for model OM16 and up to 32x32 for model OM32.

"The ability to order inputs and outputs on a singular basis is a very important feature of the Fiberlink Matrix," says Paul Seiden, director of sales. "Now a customer can purchase an optical matrix with the exact number of inputs and outputs they require giving them the ability to precisely meet their technical and budgetary needs. If a system integrator or a/v engineer has seven input signals that they need to route to 14 destinations, they can purchase a 7x14 Fiberlink Matrix. Traditionally, they would require a full 16x16 matrix for this application, purchasing more hardware than they require." Fiberlink Matrix is fully compliant with the extensive line of Fiberlink products for VGA, 3G/HD/SD-SDI, composite, component and S-video, gigabit Ethernet and much more. Fully SMPTE 297-2006 compliant for data rates up to 3 Gbps, it works with both single-mode and multimode fibre without the need for separate interface cards.
Urban Traffic Control

For more information on companies in this article

Related Content

  • Imago’s VisionCam LM makes Intertraffic debut
    March 19, 2018
    Imago Technologies is showcasing its new VisionCam LM which can unify different components of a line scan application in a single device. A modern, fast Arm Dual-Cortex A15 processor with Linux processes the data from a line scan sensor with up to 8Kb pixels in monochrome or colour. With over four times higher computing power in comparison with a Dual-Cortex A9, line scan rates of up to 50 kHz with 4Kb resolution can be reached and processed.
    Read More
  • Harnessing the strengths of CMOS for ITS applications
    January 24, 2017
    Sony’s Arnaud Destruels explains the benefits of CMOS sensors for ITS applications. In the transport sector roadside, trackside and platform cameras were devices for viewing and assessing a situation while individual sensors did all the clever stuff like traffic counting, speed calculation, queue lengths, signal status and so on. Well, not any more.
    Read More
  • Dynamic Message Signs : Don’t replace, refurbish and upgrade
    August 12, 2015
    Refurbishing old dynamic message signs can save money and increase technical capabilities as David Crawford discovers. Evidence is growing on both sides of the Atlantic of the scope for retrofitting old or technically out-of-date dynamic message signs (DMS) with new electronic equipment, to save on the costs of installing full-scale replacements. In the last four months of 2014, a number of US states progressed programmes that achieved savings of more than US$1.75 million (€1.56million).
    Read More
  • Prevention is better than cure says Antaira’s David Zaveski
    November 2, 2016
    Antaira’s David Zaveski looks at how to improve the resilience of Ethernet systems. Detection and monitoring, and the subsequent management of transport systems, is becoming ever more sophisticated and also integrated as ITS spreads wider across cities and along highways and rail corridors.
    Read More

Highlighted Content