Cyclist safety system alerts HGV drivers

Developed by UK vehicle safety specialists Sentinel Systems, the Bike Hotspot is designed to reduce the number of accidents involving cyclists and commercial vehicles. The system is designed to sense when a cyclist is within the blind spot of a large vehicle and alert both driver and cyclist.
May 11, 2015 Read time: 2 mins

Developed by UK vehicle safety specialists 8094 Sentinel Systems, the Bike Hotspot is designed to reduce the number of accidents involving cyclists and commercial vehicles. The system is designed to sense when a cyclist is within the blind spot of a large vehicle and alert both driver and cyclist.

It comprises four of Sentinel’s safety aids including a front corner system, side scan system, side camera and an external sounder and can be customised to meet the needs of the vehicle and the driver. External scanning sensors are fitted along the nearside and front corner of the vehicle, linked to an internal audio warning to alert the driver when there is a potential hazard. An external alert is also sounded to warn the cyclist or pedestrian that the vehicle is turning left.

The cameras are connected to an internal monitor inside the cab so that the driver is visually aware of any cyclists, while the scanners are programmed to detect cyclists at a particular distance and height to avoid sensing cars or pedestrians that are not at risk. A controller area network bus module has also been incorporated to ensure that the system is only activated when the vehicle is manoeuvring at a speed below 10mph.

Urban Traffic Control

For more information on companies in this article

Related Content

  • Idris paves the way for loop based speed enforcement
    February 1, 2012
    With the Idris system now validated as a speed verification tool, the way is open for loops to be used in more complex enforcement applications. Diamond Consulting Services (DCS), developer of the Idris inductive loop-based vehicle detection and classification system, has recently successfully conducted validation trials which, the company says, open the way for Idris to be used for speed verification and loop-based sensors to be used for more complex applications such as speed-on-green and differential spe
    Read More
  • Stagecoach to trial autonomous single-decker bus in the UK
    July 26, 2018
    Stagecoach will trial a single-decker autonomous bus at an unnamed depot in the UK by the end of the year. The vehicle’s sensor system could also help bus drivers operating the vehicle manually to detect cyclists and pedestrians in blind spots. The project is part of an agreement with bus manufacturer Alexander Dennis (ADL) and technology company Fusion Processing. Called ADL Enviro200, the bus will park and move into the fuelling station and bus wash at the depot in autonomous mode.
    Read More
  • Lufft’s MARWIS moves weather
    September 22, 2014
    A mobile road weather sensor is providing authorities with new options for monitoring road conditions and winter maintenance operations. Road and traffic engineers know the vulnerable points in their network – cold spots where ice forms first, high-banked roads where snow accumulates, fog pockets… Traditionally, most authorities will position weather stations at these points to detect and monitor road conditions during bad weather events.
    Read More
  • ‘Risky tailgating and speeding rife on UK motorways’
    May 22, 2014
    Six in ten UK drivers own up to risky tailgating (57 per cent) and a similar proportion break the limit by 10mph or more (60 per cent) on motorways and 70mph dual carriageways, with men by far the worst offenders, a survey by Brake and insurance company Direct Line reveals. Almost all drivers say they worry about other drivers tailgating on motorways: 95 per cent are at least occasionally concerned about vehicles too close behind them; more than four in ten (44 per cent) are concerned every, or most, tim
    Read More

Highlighted Content