Skip to main content

UK city to introduce thermal imaging traffic management

City of York Council is to introduce thermal imaging technology on key cycle routes in York to help reduce the time spent at traffic signals, improve journey reliability and cycle safety. The city is set to become one of the first councils in the country to start using the technology which will accurately detect cyclists at signals by their ‘heat signature’, allowing the signals to react accordingly and be adjusted to give more ‘green time’ for cyclists. The thermal technology was first introduced by
March 24, 2016 Read time: 2 mins
City of York Council is to introduce thermal imaging technology on key cycle routes in York to help reduce the time spent at traffic signals, improve journey reliability and cycle safety.

The city is set to become one of the first councils in the country to start using the technology which will accurately detect cyclists at signals by their ‘heat signature’, allowing the signals to react accordingly and be adjusted to give more ‘green time’ for cyclists.

The thermal technology was first introduced by 1466 Transport for London last year as part of the cycle superhighway network.

The scheme is all part of a multi million pound overhaul of York’s ageing traffic signals – the largest scheme the city has seen since the last major overhaul of York’s traffic signals in the mid 1990s which introduced the city’s new urban traffic control system to control the city’s transport network.

The five year scheme also includes replacement of worn out and unreliable in-road road loops with camera systems for traffic detection.

The authority is also proposing to replace approximately half of the 122 traffic signals and 54 pedestrian crossings in the city over a five-year rolling programme with modern equipment.

For more information on companies in this article

Related Content

  • Section speed enforcements gains global converts
    October 26, 2017
    As the benefits of section speed enforcement are becoming clearer, the technology is gaining converts worldwide. Colin Sowman reports. America’s National Transportation Safety Board (NTSB) is calling for urgent action from both road authorities and the federal government to combat speeding which has been identified as one of the most common factors in motor vehicle crashes in the United States. This new call follows the publication of a safety study which found that between 2005 through 2014, 31% of all
  • Developments in urban traffic management and control
    February 1, 2012
    Mark Cartwright, Centaur Consulting, discusses developments in urban traffic management and control. Despite the concept of UTMC (Urban Traffic Management and Control) having been around for some years now, there remains a significant rump of confusion as to its relationship with its similar-sounding cousin UTC (Urban Traffic Control). To many people, the two are one and the same. However, this is not the case.
  • Harnessing the strengths of CMOS for ITS applications
    January 24, 2017
    Sony’s Arnaud Destruels explains the benefits of CMOS sensors for ITS applications. In the transport sector roadside, trackside and platform cameras were devices for viewing and assessing a situation while individual sensors did all the clever stuff like traffic counting, speed calculation, queue lengths, signal status and so on. Well, not any more.
  • GIS mapping of road-related assets can pay dividends
    June 6, 2014
    Map-based computerised road asset management can pay dividends as Colin Sowman discovers.