Skip to main content

UK city to introduce thermal imaging traffic management

City of York Council is to introduce thermal imaging technology on key cycle routes in York to help reduce the time spent at traffic signals, improve journey reliability and cycle safety. The city is set to become one of the first councils in the country to start using the technology which will accurately detect cyclists at signals by their ‘heat signature’, allowing the signals to react accordingly and be adjusted to give more ‘green time’ for cyclists. The thermal technology was first introduced by
March 24, 2016 Read time: 2 mins
City of York Council is to introduce thermal imaging technology on key cycle routes in York to help reduce the time spent at traffic signals, improve journey reliability and cycle safety.

The city is set to become one of the first councils in the country to start using the technology which will accurately detect cyclists at signals by their ‘heat signature’, allowing the signals to react accordingly and be adjusted to give more ‘green time’ for cyclists.

The thermal technology was first introduced by 1466 Transport for London last year as part of the cycle superhighway network.

The scheme is all part of a multi million pound overhaul of York’s ageing traffic signals – the largest scheme the city has seen since the last major overhaul of York’s traffic signals in the mid 1990s which introduced the city’s new urban traffic control system to control the city’s transport network.

The five year scheme also includes replacement of worn out and unreliable in-road road loops with camera systems for traffic detection.

The authority is also proposing to replace approximately half of the 122 traffic signals and 54 pedestrian crossings in the city over a five-year rolling programme with modern equipment.

For more information on companies in this article

Related Content

  • Aberdeen opts for wireless vehicle detection
    February 26, 2013
    After several years’ experience of loop detector failures, primarily identified as being caused by damage from roadworks or degradation of aging road surfaces, Aberdeen City Council opted to use the Golden River M100 wireless detection system from Clearview Traffic. Each compact M100 sensor is typically installed in the middle of a traffic lane where it detects the presence and passage of vehicles and communicates this information wirelessly to the traffic signal controller via an access point and contact c
  • Columbia goes intermodal to support sustainability
    April 10, 2014
    David Crawford on the ups and downs of a Latin metropolis. Medellín, Colombia’s second city and a recognised leader in sustainable transport thinking, is rapidly extending its substantial existing investment in modern mobility. It is deploying both an enhanced integrated traffic management array and the country’s first intermodal public transportation management system. The supplier of both, under separate €9 million (US$12.3 million) contracts, is Spanish engineering company Indra, a major exporter
  • TrafiOne the focal point for Flir Systems at Intertraffic
    April 4, 2016
    Flir Systems is using Intertraffic to launch the Flir TrafiOne Smart City Sensor, an all-round detection sensor for traffic monitoring and dynamic traffic signal control. Offered in a compact and easy-to-install package, the device uses thermal imaging and Wi-Fi tracking technology to provide traffic engineers with high-resolution data on vehicles, bicycles and pedestrians at intersections and in urban environments.
  • RAC: over half of drivers believe congestion has worsened on UK major roads
    November 2, 2017
    56% of 1,727 drivers questioned in an annual survey believe that congestion has worsened on UK major roads, which carries 65% of all traffic, despite them comprising only 13% of the country’s road network. The findings from the survey have been presented by the RAC’s Report on Motoring.