Skip to main content

TfL trials cyclist detection

New world first trials would allow TfL to better cater for cyclists at key junctions Further on-street trials will take place later this year TfL now given blanket approval from DfT to install low-level cycle signals at junctions Transport for London (TfL) is to trial a new technology that will help give cyclists more time on green lights.
June 5, 2015 Read time: 3 mins
1466 Transport for London (TfL) is to trial a new technology that will help give cyclists more time on green lights.

The trials, which are taking place along Cable Street on Cycle Superhighway 3, detect the numbers of cyclists travelling along a route. This enables the traffic signal timings to be adjusted to give more green time when there are high numbers of cyclists at key junctions during peak times.

The new cycle trials are testing two types of new technology - one radar-based and one thermal based, which detects the heat of riders as they enter the detection zone - to measure their effectiveness in detecting cyclists. TfL will carry out three additional trials along the cycle superhighway network to test both with different junction designs as they assess the possibility of introducing them across London.
 
By using the data from the detection technology, TfL plans to make the timings at the traffic signals reflect demand on a second-by-second basis, helping to provide immediate benefit to cycle flow at junctions.

The Mayor of London, Boris Johnson, said: “Once again London leads the way as we host world-first trials of technology that has the potential to bring significant benefits to cyclists. With record numbers taking to two wheels we are doing everything we can to make our roads more inviting places to be.  This is another great example of how TfL can harness the power of innovation to help make it easier for everyone to get around our city.”
 
Garrett Emmerson, Chief Operating Officer for Surface Transport at TfL, said: “These hugely innovative trials are another major step forward to create roads designed for all types of road users. By having traffic signals that are able to detect when there are high numbers of cyclists waiting at junctions, we can ensure they are given adequate time and safe passage through the junction, balancing the needs of everyone.”

The new cycle detection trials build on the Pedestrian SCOOT trials, which provide more time to safely cross the road when there are large volumes of pedestrians.
 
Subject to the outcome of these further trials, TfL will look to expand the use of the technology as part of wider cycle infrastructure investment in the capital as well as integrating it into London’s sophisticated traffic signalling system SCOOT (Split Cycle Offset Optimisation Technique). SCOOT already manages vehicular traffic flows across London on a second-by-second basis.
 
The announcement also comes as TfL receives blanket approval from the 1837 Department for Transport (DfT) to install low level cycle signals at traffic signals where they would deliver benefits. This is the first time a highway authority in the UK has been given this approval and means that the signals, which are common place in continental Europe, can be installed as part of the wider Cycle Superhighway works being carried out across London. TfL is also working with local boroughs to identify further locations across London where these new low level signals could be introduced on borough roads.

British Cycling's Campaigns Manager, Martin Key, said: "It is great to see that low-level traffic lights can now be installed more widely across London. They have been used successfully across Europe and make it easier for cyclists to know when it is safe for them to ride through the junction. Transport for London is again leading the way and these lights, plus other cycle friendly measures, should be available to use not only in the capital but across the whole country over the next couple of years.”

For more information on companies in this article

Related Content

  • Traffic sensors give cyclists green lights
    February 1, 2013
    Transport officials in Columbus, Ohio, are following in the footsteps of Austin, Texas; Portland, Oregon and Berkeley, California and recalibrating their traffic signal sensors to accommodate the growing number of cyclists in the city. Nearly all the city’s 1,000 traffic lights are connected to road sensors that detect the presence of vehicles at the intersections and adjust the lights accordingly. Cycles are another story; they don’t contain enough metal to trigger the sensor. This has caused some cyclis
  • UK DfT releases new traffic sign regulations
    May 5, 2016
    The UK Department for Transport (DfT) has released its circular on Traffic Signs Regulations and General Directions 2016 (TSRGD), which it says represents a significant contribution to the Government's deregulatory programme. TSRGD prescribes the designs and conditions of use for traffic signs, including road markings, traffic signals, pedestrian, cycle and equestrian crossings, to be lawfully placed on or near roads in England, Scotland and Wales.
  • Tattile explores freedom of movement
    October 5, 2020
    Dense urban centres are complex enforcement environments – but camera-based traffic systems enable all aspects of monitoring, explains Massimiliano Cominelli of Tattile
  • Machine vision’s image of road management’s future
    June 11, 2015
    Q-Free’s Marco Sinnema looks at how the commoditisation of high-quality vision-based solutions is widening their application. Machine vision technology’s entry into the ITS/traffic management sector has followed a classic top-down path. This is unsurprising given the extremely demanding performance criteria which are the standard in its market of origin, manufacturing processing. Very high image qualities combined with frame rates often in the hundreds per second range resulted in vision systems with capabi